Pioneer DEH-S4200BT Operation Manual Download

Page: 33 / 56

- 33 -

En
g

lis

→

iPhone failure.
– Disconnect the cable from the iPhone.

Once the iPhone’s main menu is
displayed, reconnect the iPhone and
reset it.

STOP

→

There are no songs in the current list.
– Select a list that contains songs.

NO BT DEVICE GO TO BT MENU TO
REGISTER

→

No Bluetooth device found.
– Connect the unit and iPhone via

Bluetooth (page 11).

CONN. FAILED PRESS BAND KEY TO
RETRY

→

Bluetooth connection with iPhone
failed.
– Press

BAND

to make a

connection again.

DISCONNECTED PRESS BAND KEY TO
RETRY

→

Bluetooth connection lost.
– Press

BAND

to make a

connection again.

Bluetooth device

ERROR-10

→

The power failed for the Bluetooth
module of the unit.
– Turn the ignition switch OFF and back

to ACC or ON.

Pandora

ERROR-19

→

Communication failed.
– Disconnect the cable from the device.

Once the device’s main menu is
displayed, reconnect the device and
reset it.

NOT FOUND

→

The Pandora application has not started
running yet.
– Start up the Pandora application.

RATING ERROR

→

The thumb rating operation was
disabled.
– Run the same command for another

track.

CAN'T SKIP

→

The skip operation was disabled.
– Run the same command for another

track.

THUMB ERROR

→

Unable to save thumb rating.
– Try again later.

BOOKMARK ERR

→

Unable to save BookMark.
– Try again later.

INOPERABLE

→

The operation to save BookMark or add
station was disabled.
– Run the same command for another

track.

UNABLE TO ADD

→

Unable to add station.
– Try again later.

SKIP LIMIT

→

Due to music licensing restrictions,
Pandora limits the total number of skips
per hour.
– Wait until Pandora allows you to skip

again.

UPDATE APP

→

This version of the Pandora application
is not supported.
– Connect a device that has a

compatible version of the Pandora
application installed.

Summary of Contents for DEH-S4200BT
























































Search results

Summary of Contents for DEH-S4200BT

Reviews:

Related manuals for DEH-S4200BT

Brands by name

Popular brands

Pioneer DEH-S4200BT, Operation Manual

Search results

Summary of Contents for DEH-S4200BT

Reviews:

Related manuals for DEH-S4200BT

Brands by name

Popular brands