12
En
•
For devices other than the USB-connected Android device, press
SRC
/
OFF
to select
any source and press and hold the
M.C.
dial.
NOTES
•
When you connect a mobile device other than an Android device, it may not operate correctly
depending on your mobile device.
•
If Pioneer Smart Sync has not been installed on your Android device yet, a message that prompts you
to install the application will appear on your Android device (except for the Android device
connected via Bluetooth). Select [OFF] in [AUTO APP CONN] to clear the message (page 15).
1
Press
SRC/OFF
to select [APP].
You can also make various adjustments in the AUDIO settings (page 13).
You can adjust the cut-off frequency value and the slope value of each speaker.
The following speakers can be adjusted.
[FRONT], [REAR], [SUBWOOFER]
NOTE
[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 13).
1
Press the
M.C.
dial to display the main menu.
2
Turn the
M.C.
dial to select [AUDIO], then press to confirm.
3
Turn the
M.C.
dial to select [CROSSOVER], then press to confirm.
4
Turn the
M.C.
dial to select the speaker unit (filter) to be adjusted, then press to
confirm.
5
Turn the
M.C.
dial to select [HPF] or [LPF] according to the speaker unit (filter),
then press to confirm.
6
Turn the
M.C.
dial to select an appropriate cut-off frequency for the speaker unit
(filter) selected in step 4, then press to confirm.
[25HZ] to [250HZ]
Listening to music on your device
Audio Adjustments
Adjusting the cut-off frequency value and the slope
value
7
Turn the
M.C.
dial to select an appropriate slope for the speaker unit (filter)
selected in step 4.
[–6] to [–24] (if you choose [FRONT] or [REAR])
[–6] to [–36] (if you choose [SUBWOOFER])
You can adjust various settings in the main menu.
1
Press the
M.C.
dial to display the main menu.
2
Turn the
M.C.
dial to select one of the categories below, then press to confirm.
•
•
•
•
ILLUMINATION settings (page 15)
•
3
Turn the
M.C.
dial to select the options, then press to confirm.
The menu items vary according to the source.
Settings
FUNCTION settings
Menu Item
Description
BSM
Store the six strongest stations on the number
buttons (
1
/
to
6
/
) automatically.
REGIONAL
[ON], [OFF]
Limit the reception to the specific regional
programs when AF (alternative frequencies
search) is selected. (Available only when FM
band is selected.)
LOCAL
FM:
[OFF], [LV1], [LV2], [LV3], [LV4]
AM/SW:
[OFF], [LV1], [LV2]
Restrict the tuning station according to the
signal strength.
TA
[ON], [OFF]
Receive current traffic information if available.
(Available only when FM band is selected.)