Pioneer DEH-S3190BT, Owner'S Manual

Page: 11 / 24

11
En
En
g
lis
h
• Select [WIRED] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
5
Turn the M.C. dial to select [AUTO APP CONN], then press to confirm.
6
Turn the M.C. dial to select [ON], then press to confirm.
7
Connect this unit with the mobile device.
• Android device via USB (page 6)
• Android device via Bluetooth (page 7)
Pioneer Smart Sync on the device starts automatically.
NOTE
Regardless of whether the [AUTO APP CONN] setting is set to [ON] or [OFF], you can
also perform the following to start Pioneer Smart Sync.
• For devices other than the USB-connected Android device, press SRC / OFF to select
any source and press and hold the M.C. dial.
NOTES
• When you connect a mobile device other than an Android device, it may not operate correctly
depending on your mobile device.
• If Pioneer Smart Sync has not been installed on your Android device yet, a message that prompts you
to install the application will appear on your Android device (except for the Android device
connected via Bluetooth). Select [OFF] in [AUTO APP CONN] to clear the message (page 14).
1
Press SRC/OFF to select [APP].
You can also make various adjustments in the AUDIO settings (page 12).
You can adjust the cut-off frequency value and the slope value of each speaker.
The following speakers can be adjusted.
[FRONT], [REAR], [SUBWOOFER]
NOTE
[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 12).
1
Press the M.C. dial to display the main menu.
Listening to music on your device
Audio Adjustments
Adjusting the cut-off frequency value and the slope
value
2
Turn the M.C. dial to select [AUDIO], then press to confirm.
3
Turn the M.C. dial to select [CROSSOVER], then press to confirm.
4
Turn the M.C. dial to select the speaker unit (filter) to be adjusted, then press to
confirm.
5
Turn the M.C. dial to select [HPF] or [LPF] according to the speaker unit (filter),
then press to confirm.
6
Turn the M.C. dial to select an appropriate cut-off frequency for the speaker unit
(filter) selected in step 4, then press to confirm.
[25HZ] to [250HZ]
7
Turn the M.C. dial to select an appropriate slope for the speaker unit (filter)
selected in step 4.
[–6] to [–24] (if you choose [FRONT] or [REAR])
[–6] to [–36] (if you choose [SUBWOOFER])
You can adjust various settings in the main menu.
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select one of the categories below, then press to confirm.
• FUNCTION settings (page 11)
• AUDIO settings (page 12)
• SYSTEM settings (page 13)
• ILLUMINATION settings (page 14)
• MIXTRAX settings (page 14)
3
Turn the M.C. dial to select the options, then press to confirm.
The menu items vary according to the source.
Settings
FUNCTION settings
Menu Item Description
BSM
Store the six strongest stations on the number
buttons (
1 / to 6 / ) automatically.