background image

13

En

En
g

lis

h

PROTECT

All the files on the inserted disc are 
embedded with DRM.
– Replace the disc.

USB device

FORMAT READ

Sometimes there is a delay between the 
start of playback and when you start to 
hear any sound.
– Wait until the message disappears and 

you hear sound.

NO AUDIO

There are no songs.
– Transfer the audio files to the USB 

device and connect.

The connected USB device has security 
enabled.
– Follow the USB device instructions to 

disable the security.

SKIPPED

The connected USB device contains 
DRM protected files.
– The protected files are skipped.

PROTECT

All the files on the connected USB 
device are embedded with DRM.
– Replace the USB device.

N/A USB

The connected USB device is not 
supported by this unit.
– Disconnect your device and replace it 

with a compatible USB device.

HUB ERROR

The USB device connected via a USB 
hub is not supported by this unit.
– Connect the USB device directly to this 

unit using a USB cable.

CHECK USB

The USB connector or USB cable has 
short-circuited.

– Check that the USB connector or USB 

cable is not caught in something or 
damaged.

The connected USB device consumes 
more than maximum allowable current.
– Disconnect the USB device and do not 

use it. Turn the ignition switch OFF 
and back to ACC or ON. Connect only 
compliant USB devices.

ERROR-19

Communication failed.
– Perform one of the following 

operations, then return to the USB 
source.

Disconnect the USB device.

Change to a different source.

ERROR-23

USB device was not formatted properly.
– Format the USB device with FAT12, 

FAT16 or FAT32.

Discs and player

Use only discs that feature either of the 
following two logos.

Use 12-cm discs.

Use only conventional, fully circular discs.

The following types of discs cannot be 
used with this unit:
– DualDiscs
– 8-cm discs: Attempts to use such discs 

with an adaptor may cause the unit to 
malfunction.

– Oddly shaped discs
– Discs  other  than  CDs
– Damaged discs, including discs that are 

cracked, chipped or warped

Handling guidelines

– CD-R/RW discs that have not been 

finalized

Do not write on or apply chemicals to the 
surface of the discs.

To clean a CD, wipe the disc with a soft 
cloth outward from the center.

Condensation may temporarily impair 
the player’s performance. Let it rest for 
about one hour to adjust to a warmer 
temperature. Also, wipe any damp discs 
off with a soft cloth.

When using discs that can be printed on 
label surfaces, check the instructions and 
the warnings of the discs. Depending on 
the discs, inserting and ejecting may not 
be possible. Using such discs may result 
in damage to this equipment.

Do not attach commercially available 
labels or other materials to the discs.
– The discs may warp making the disc 

unplayable.

– The labels may come off during 

playback and prevent ejection of the 
discs, which may result in damage to 
the equipment.

USB storage device

Connections via USB hubs are not 
supported.

Firmly secure the USB storage device 
before driving. Do not let the USB storage 
device fall onto the floor, where it may 
become jammed under the brake or 
accelerator pedal.

Depending on the USB storage device, 
the following problems may occur.
– Operations  may  vary.
– The storage device may not be 

recognized.

– Files may not be played back properly.
– The device may cause audible 

interference when you are listening to 
the radio.

Only the first 32 characters can be 
displayed as a file name (including the file 
extension) or a folder name.

The unit may not work properly 
depending on the application used to 
encode WMA files.

There may be a slight delay at the start of 
the playback of audio files embedded 
with image data, or audio files stored on a 
USB device with numerous folder 
hierarchies.

 CAUTION

Pioneer cannot guarantee compatibility 
with all USB mass storage devices, and 
assumes no responsibility for any loss of 
data on media players, smartphones, or 
other devices while using this product.

Do not leave discs or a USB storage 
device in any place that is subject to high 
temperatures.

WMA files

MP3 files

Compressed audio 
compatibility

File extension

.wma

Bit rate

48 kbps to 320 kbps 
(CBR), 48 kbps to 384 
kbps (VBR)

Sampling frequency

32 kHz, 44.1 kHz, 48 
kHz

Windows Media™ 
Audio Professional, 
Lossless, Voice/DRM 
Stream/Stream with 
video

Not compatible

File extension

.mp3

Bit rate

8 kbps to 320 kbps 
(CBR), VBR

Summary of Contents for DEH-S1190UB

















Reviews: