Pioneer DEH-P9850BT Operation Manual Download Page 86

Page: 86 / 104

Black plate (86,1)

Push MULTI-CONTROL left or right to

adjust the brightness level.

Each time

MULTI-CONTROL

is pushed left or

right, brightness level increases or decreases.

is displayed as the level is increased or

decreased.

When dimmer is functioning, the brightness

level can be adjusted

Correcting distorted sound

When listening to a CD or other source on
which the recording level is high, setting the
equalizer curve level to high may result in dis-
tortion. You can switch the digital attenuator
to low to reduce distortion.

Sound quality is better at the high setting
so this setting is usually used.

Use MULTI-CONTROL to select

Digital ATT.
Digital ATT

appears in the display.

Press MULTI-CONTROL to select the di-

gital attenuator level.

Pressing

MULTI-CONTROL

repeatedly will

switch between

High

(high) and

Low

(low)

and that status will be displayed.

Switching the sound
muting/attenuation

Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.

The sound is muted or attenuated,

MUTE

ATT

are displayed and no audio adjust-

ment is possible.

Sound from this system returns to normal
when the muting or attenuation is can-
celed.

Use MULTI-CONTROL to select Mute.

Mute

appears in the display.

Press MULTI-CONTROL to select the de-

sired setting.

Press

MULTI-CONTROL

repeatedly to switch

between the following settings:

TEL mute

–

Muting

10dB ATT

–

Attenuation

20dB ATT

–

Attenuation (

20dB ATT

has a

stronger effect than

10dB ATT

)

Switching the feature demo

The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.

Use MULTI-CONTROL to select

Demonstration.
Demonstration

appears in the display.

Press MULTI-CONTROL to turn the fea-

ture demo on.
ON

appears in the display.

To turn the feature demo off, press

MULTI-CONTROL

again.

Notes

Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.

You can also turn on or off feature demo by
pressing

DISPLAY

while this unit is turned off.

For more details, see

Feature demo mode

page 10.

<CRB2179-A/N>86

Initial Settings

Section

Summary of Contents for DEH-P9850BT









































































































Search results

Summary of Contents for DEH-P9850BT

Reviews:

Related manuals for DEH-P9850BT

Brands by name

Popular brands

Pioneer DEH-P9850BT, Operation Manual

Search results

Summary of Contents for DEH-P9850BT

Reviews:

Related manuals for DEH-P9850BT

Brands by name

Popular brands