Pioneer DEH-P9400BH, Owner'S Manual

Page: 19 / 96

This system can alert you when games involving
your favorite teams are about to start. To use this
function you need to set up a game alert for the
teams in advance.
!
To use this function, a Pioneer SIRIUS bus in-
terface (e.g. CD-SB10) is required.
!
To use this function, a SIRIUS plug-and-play
unit with a Game Alert Function is required.
!
For details, refer to the SIRIUS plug-and-play
unit
’
s manuals.
!
You can also operate this function when a SIR-
PNR2 is connected to this unit.
!
The Game Alert function is on at the default
setting.
!
Once you select the teams, you need to turn
the Game Alert function on.
1
Press M.C. to turn the Game Alert on or off.
!
When a game of the selected team is about to
start (or is currently playing) on a different sta-
tion,
Game alert info is displayed. Press and
hold M.C. to switch to that station, and you
can listen to that game.
Team setting (team setting)
1
Press M.C. to select the function.
2
Turn
M.C.
to select a desired league.
3
Turn M.C. to select a desired team.
4
Press M.C. to store the selected team in mem-
ory.
The game alert function is activated for that
team.
5
Repeat these steps to select other teams.
!
When FULL is displayed, additional teams
cannot be selected. In this case, first delete
a selected team and then try again.
Game info (game information)
If any games of the selected teams are currently
playing, you can display information on the games
and tune in to the broadcast channel.
You can display information on the games while
enjoying the sound from the station you are cur-
rently tuned in to. You can also tune in to the
broadcast channel when you wish to.
1
Press
M.C.
to select the function.
2
Turn M.C. to select a game.
!
The game score will be updated automati-
cally.
3
Press M.C. to switch to the other station and
listen to the game.
!
If you have not selected any teams,
NOT SET
is
displayed.
!
When games involving your favorite teams are
not currently playing,
NO GAME is displayed.
Pause (pause)
During the Instant Replay mode, you can select
Pause (pause). Refer to Using the Instant Replay
function on this page.
1
Press M.C. to pause or resume.
Selecting a channel from a
channel category
1 Select the channel select settings to
Category.
Refer to Channel mode (channel select mode
setting) on the previous page.
2 Push or to select the desired chan-
nel category.
3 Turn LEVER to select the desired channel
from the selected channel category.
Using the Instant Replay function
The following functions can be operated in In-
stant Replay mode.
!
To use this function, a Pioneer SIRIUS bus in-
terface (e.g. CD-SB10) is required.
!
To use this function, a SIRIUS plug-and-play
unit with an Instant Replay Function is re-
quired.
!
For details, refer to the SIRIUS plug-and-play
unit
’
s manuals.
Using Instant Replay mode
1
When SIRIUS tuner is selected as the source,
press and hold
BAND / .
!
When BAND / is pressed, instant replay
mode is canceled.
!
When another source is selected, instant
replay mode is canceled.
Select a track
1
Turn
LEVER
.
Fast forward or reverse
1
Turn and hold down
LEVER
for about one sec-
ond and then release.
English
Available accessories
19
Section
Available accessories
En
03