27
Using the RDS Functions
PI Seek Function
The tuner searches for another frequency broadcasting the same programming. “PI Seek”
appears on the display and the radio volume is muted during a PI Seek. The muting is dis-
continued after completion of the PI Seek, whether or not the PI seek has succeeded. If the
PI Seek is unsuccessful, the tuner returns to the previous frequency.
PI Seek
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is
too weak for proper reception, the PI Seek will automatically start.
Auto PI Seek (for preset station)
When preset stations cannot be recalled, as when traveling long distances, the product can
be set to perform PI Seek also during preset recall.
The default setting for Auto PI Seek is OFF.
Note:
• Refer to “Initial Setting” for details on how to switch Auto PI Seek ON/OFF.
Regional Function (Regional)
When AF is used to retune the tuner automatically, the Regional function limits the selec-
tion to stations broadcasting regional programs.
Note:
• Regional programming and regional networks are organized differently depending on the country
(i.e., they may change according to the hour, state or broadcast area).
• The preset number may disappear on the display if the tuner tunes in a regional station which dif-
fers from the originally set station.
• Regional can be switched ON or OFF independently for each FM band.
• “REG” is displayed if you activate the Regional function when the Function Menu is canceled.
Activating/Deactivating the Regional Function
The Regional function is set to ON by default.
1. Press the FUNCTION button and select the Regional mode (Regional) in the
Function Menu.
2. Activate or deactivate Regional while in an FM band.
“REG”
