Initial Settings
En
45
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
AUX
.
Press
FUNCTION
until
AUX
appears in the dis-
play.
3 Select
AUX
on or off with
5
/
∞
.
Pressing
5
/
∞
will switch
AUX
between on and
off and that status will be displayed (e.g.,
AUX :ON
).
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car’s headlights are turned on. You
can switch dimmer on or off.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
DIM
.
Press
FUNCTION
until
DIM
appears in the dis-
play.
3 Select
DIM
on or off with
5
/
∞
.
Pressing
5
/
∞
will switch
Dimmer
between on
and off and that status will be displayed (e.g.,
Dimmer :ON
).
Selecting the brightness
You can select the display brightness. Initially
this mode is set to 12.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
BRIGHT
.
Press
FUNCTION
until
BRIGHT
appears in the
display.
3 Select the desired brightness with
2
/
3
.
• The display shows
0
–
15
.
Setting the rear output and sub-
woofer controller
This product’s rear output (rear speaker leads
output and RCA rear output) can be used for
full-range speaker (
Rear SP:FULL
) or subwoofer
(
Rear SP:S.W
) connection. If you switch rear
output setting to the
Rear SP:S.W
, you can con-
nect a rear speaker lead directly to a subwoofer
without using an auxiliary amp.
Initially, the unit is set for rear full-range speaker
connection (
Rear SP:FULL
).
When rear output are connected to full range
speakers (when
Rear SP:FULL
is selected), you
can connect the RCA subwoofer output to a
subwoofer. In this case, you can select whether
to use the subwoofer controller’s (low pass
filter, phase) built-in
S.W Control:INT
or the
auxiliary
S.W Control:EXT
.
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
08
Section
