Pioneer DEH-P8000R Service Manual Download Page 57

Page: 57 / 77

DEH-P8000R,P8050

Removing the Upper Frame

1. Remove six Springs A, two Springs B and four

Screws.

2. Remove two Tabs situated on rear side of the Upper

Frame, remove two Arms on the front side, then

remove two Tabs on the front side.

Removing the Carriage Mechanism

1. Disengage the Carriage Mechanism from the two

dampers situated in the front side by driving it up,

then disengage and remove the mechanism from the

two dampers by driving it up aslant into front side

direction.

Note : When assembling the Carriage Mechanism, coat

the dampers with alcohol prior to the assembly.

Removing the Clamp Arm Assy

1. Remove a Spring A, a B and a Spring C.

2. Drive the Clamp Arm Assy up into rear side direction,

then disengage the arm from its current position

Finally, drive the assembly approximately 45 degrees

upward, then slide the assembly toward right side to

remove it.

Arm

Upper Frame

Carriage Mechanism Section

Clamp Arm Assy Section

Summary of Contents for DEH-P8000R














































































Search results

Summary of Contents for DEH-P8000R

Reviews:

Related manuals for DEH-P8000R

Brands by name

Popular brands

Pioneer DEH-P8000R, Service Manual

Search results

Summary of Contents for DEH-P8000R

Reviews:

Related manuals for DEH-P8000R

Brands by name

Popular brands