Pioneer DEH-P77DH - Radio / CD Player, Installation Manual

Page: 14 / 48

13
DFS Alarm Installation
STARTER CUT-OFF (Blue/Brown)
The blue/brown lead will provide a cont12 V output while alarm is sounding and
for 30 minutes after initial trigger, up to 5 consecutive triggers. This lead has a maximum
current capability of 500 mA and can be used to trigger a relay to disable the starter.
Note:
• In order for the “DFS Alarm” to operate when a window is broken, connect this unit’s White/Red
(ALARM SENSOR) lead to glass sensor securely.
• In order for the “DFS Alarm” to operate when a door is forced open, connect this unit’s
White/Yellow (DOOR SWITCH) lead securely.
7
Recommended Wiring:
30 amp relay (sold separately) required to disable starter.
• Connect blue/brown lead to one side of relay coil.
• Connect other side of coil to ground.
• Locate starter wire under dash, near steering column.
• Cut starter wire and try to start vehicle to verify wire is correct.
• Connect key side of cut wire to normally closed pin.
• Connect starter side of cut wire to common pin.
Fig. 9
Brown (refer to “ALARM OUTPUT”.)
White/Yellow (refer to “DOOR SWITCH”.)
Blue/Brown
White/Orange (refer to “DOOR LOCK”.)
White/Red (refer to “ALARM SENSOR”.)
To Starter
From Ignition
Switch
See the
“Avoiding Trouble”.
30 A “SPDT” RELAY
(sold separately)
This product