Pioneer DEH P7500MP, Operation Manual

Page: 21 / 128

Introduction of advanced
built-in CD player operation
1
1 Function display
Shows the function status.
% Press FUNCTION to displaythe function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
Repeat (repeat play) Random (random play)
Scan (scan play) Pause (pause) FF/REV
(search method) Tag Read (tag display)
# To return to the playback display, press BAND .
Notes
! When playing audio data (CD-DA), it is not ef-
fective even if you turn
Tag Read (tag display)
on. (Refer to page 29.)
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select Repeat.
Press FUNCTION until Repeat appears in the
display.
2 Press a to turn repeat playon.
Repeat : ON appears in the display. The track
currently playing will play and then repeat.
3 Press b to turn repeat playoff.
Repeat :OFF appears in the display. The track
currently playing will continue to play and
then play the next track.
Note
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select Random.
Press FUNCTION until Random appears in
the display.
2 Press a to turn random playon.
Random : ON appears in the display. Tracks
will play in a random order.
3 Press b to turn random playoff.
Random :OFF appears in the display. Tracks
will continue to play in order.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the
display.
2 Press a to turn scan playon.
Scan : ON appears in the display. The first 10
seconds of each track is played.
Built-in CD Player
En
21
English
Section
06