!
The preset number may disappear from the
display if the tuner tunes in a regional station
which differs from the originally set station.
!
The regional function can be turned on or off
independently for each FM band.
Receiving traffic announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other network
’
s TP station (a station
carrying information which cross-references
TP stations).
1
Tune in a TP or enhanced other net-
work
’
s TP station.
The TP (
) indicator will light.
2
Press TA to turn traffic announcement
standby on.
#
To turn off, press
TA
again.
3
Use MULTI-CONTROL to adjust the TA
volume when a traffic announcement be-
gins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4
Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until
TA
is pressed
again.
Notes
!
You can also turn this function on or off in the
menu that appears by using
MULTI-CONTROL
.
!
The system switches back to the original
source following traffic announcement recep-
tion.
!
Only TP and enhanced other network
’
s TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
Using PTY functions
You can tune in a station by using PTY (pro-
gram type) information.
Searching for an RDS station by PTY
information
You can search for general types of broadcast-
ing programs, such as those listed on page
17.
1
Display the function menu.
Refer to
Introduction of advanced operations
on
page 13.
2
Use MULTI-CONTROL to select
PTY search in the function menu.
3
Push MULTI-CONTROL left or right to
select a program type.
News&Inf
—
Popular
—
Classics
—
Others
4
Press MULTI-CONTROL to begin the
search.
The unit searches for a station broadcasting
that program type. When a station is found, its
program service name is displayed.
PTY (program type ID code) information is
listed on page 17.
#
To cancel the search, press
MULTI-CONTROL
again.
#
The program of some stations may differ from
that indicated by the transmitted PTY.
#
If no station is broadcasting the type of pro-
gram you searched for,
Not found
is displayed
for about two seconds and then the tuner returns
to the original station.
Operating this unit
En
15
Section
02
Operating
this
unit
