Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION
,
AUDIO
and
ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3
Turn MULTI-CONTROL to select the
function.
Turn
MULTI-CONTROL
to switch between the
functions in the following order:
BSM
(best stations memory)
—
Regional
(re-
gional)
—
Local
(local seek tuning)
—
PTY search
(program type selection)
—
Traffic Announce
(traffic announcement
standby)
—
Alternative FREQ
(alternative fre-
quencies search)
—
News interrupt
(news
program interruption)
#
You can also select the function by pressing
FUNCTION
on the remote control.
#
If MW/LW band is selected, you can only se-
lect
BSM
or
Local
.
#
To return to the frequency display, press
BAND
.
#
If you do not operate functions within about
30 seconds, the display is automatically returned
to the ordinary display.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under
1
to
6
on the remote control
and once stored there you can tune in to those
frequencies with the touch of a button.
!
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using
1
to
6
on the remote con-
trol.
1
Use MULTI-CONTROL to select BSM in
the function menu.
2
Press MULTI-CONTROL to turn BSM on.
Six strongest broadcast frequencies will be
stored in the order of their signal strength.
#
To cancel the storage process, press
MULTI-CONTROL
again.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Use MULTI-CONTROL to select Local in
the function menu.
2
Press MULTI-CONTROL to turn local
seek tuning on.
#
To turn local seek tuning off, press
MULTI-CONTROL
again.
3
Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for MW/LW:
FM:
Level 1
—
Level 2
—
Level 3
—
Level 4
MW/LW:
Level 1
—
Level 2
The
Level 4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Selecting alternative frequencies
When the tuner can
’
t get good reception, the
unit automatically search for a different sta-
tion in a same network.
1
Use MULTI-CONTROL to select
Alternative FREQ in the function menu.
Operating this unit
En
13
English
Section
02
