07
Section
En
32
Setting the FM tuning step
The tuning step employed by Seek Tuning in the
FM mode can be switched between 100 kHz
(preset at the factory) and 50 kHz.
1 Press
FUNCTION
to select
FM STEP
.
Press
FUNCTION
repeatedly until
FM STEP
appears in the display.
2 Select the FM tuning step with
2
/
3
.
Note
• If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune in
the stations with manual tuning or use seek
tuning again.
Setting the AM tuning step
The AM tuning step can be switched between 9
kHz, the preset step, and 10 kHz. When using
the tuner in North, Central or South America,
reset the tuning step from 9 kHz (531 – 1,602
kHz allowable) to 10 kHz (530 – 1,640 kHz allow-
able).
1 Press
FUNCTION
to select
AM STEP
.
Press
FUNCTION
repeatedly until
AM STEP
appears in the display.
2 Select the
AM
tuning step with
2
/
3
.
Pressing
2
/
3
will switch the AM tuning step
between 9 kHz and 10 kHz. The selected AM
tuning step will appear in the display.
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press
FUNCTION
to select
WARN
.
Press
FUNCTION
repeatedly until
WARN
appears in the display.
2 Select
WARN
on or off with
5
/
∞
.
Pressing
5
/
∞
will switch
WARN
between on
and off and that status will be displayed (e.g.,
WARN :ON
).
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using external equipment connected to this
unit.
1 Press
FUNCTION
to select
AUX
.
Press
FUNCTION
repeatedly until
AUX
appears
in the display.
2 Select
AUX
on or off with
5
/
∞
.
Pressing
5
/
∞
will switch
AUX
between on and
off and that status will be displayed (e.g.,
AUX :ON
).
Initial Settings
