+6
to
–
6
is displayed as the level is increased
or decreased.
#
You can then select another band and adjust
the level.
5
Press BAND/ESC to cancel the 7-band
graphic equalizer adjustment.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Use MULTI-CONTROL to select
Loudness in the audio function menu.
Refer to
Introduction of audio adjustments
on
page 24.
2
Press MULTI-CONTROL to turn loudness
on.
Loudness level (e.g.,
Mid
) appears in the dis-
play.
#
To turn loudness off, press
MULTI-CONTROL
again.
3
Push MULTI-CONTROL left or right to
select a desired level.
Each time
MULTI-CONTROL
is pushed left or
right, level is selected in the following order:
Low
(low)
—
Mid
(mid)
—
High
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Press SW/BASS to display the subwoo-
fer setting mode.
Press
SW
/
BASS
repeatedly to switch between
the subwoofer setting modes in the following
order.
SubWoofer1
(subwoofer on/off setting) set-
ting mode
—
SubWoofer2
(subwoofer setting)
setting mode
2
Select SubWoofer1 setting mode.
3
Press MULTI-CONTROL to turn subwoo-
fer output on.
Normal
appears in the display. Subwoofer out-
put is now on.
#
To turn subwoofer output off, press
MULTI-CONTROL
again.
4
Push MULTI-CONTROL left or right to
select the phase of subwoofer output.
Push
MULTI-CONTROL
left to select reverse
phase and
Reverse
appears in the display.
Push
MULTI-CONTROL
right to select normal
phase and
Normal
appears in the display.
Note
You can also switch to this setting mode in the
menu that appears by using
MULTI-CONTROL
.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
!
When the subwoofer output is on, you can
select
SubWoofer2
.
1
Press SW/BASS to display the subwoo-
fer setting mode.
Press
SW
/
BASS
repeatedly to switch between
the subwoofer setting modes in the following
order.
SubWoofer1
(subwoofer on/off setting) set-
ting mode
—
SubWoofer2
(subwoofer setting)
setting mode
2
Select SubWoofer2 setting mode.
3
Push MULTI-CONTROL left or right to
select cut-off frequency.
Each time
MULTI-CONTROL
is pushed left or
right, cut-off frequencies are selected in the
following order:
50Hz
—
63Hz
—
80Hz
—
100Hz
—
125Hz
Audio Adjustments
En
26
Section
03