Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
EQ-LOW
/
EQ-MID
/
EQ-HIGH
).
Level (dB)
Center frequency
Q=2N
Q=2W
Frequency (Hz)
1
Press AUDIO and hold until frequency
and the Q factor (e.g., F-80 Q-1W) appears
in the display.
2
Press AUDIO to select the band for ad-
justment from among low, mid and high.
3
Press
c
or
d
to select the desired fre-
quency.
Low:
40
—
80
—
100
—
160
(Hz)
Mid:
200
—
500
—
1k
—
2k
(Hz)
High:
3k
—
8k
—
10k
—
12k
(Hz)
4
Press
a
or
b
to select the desired Q fac-
tor.
2W
—
1W
—
1N
—
2N
Note
If you make adjustments,
CUSTOM
curve is up-
dated.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Press AUDIO to select LOUDNESS.
2
Press
a
to turn loudness on.
Loudness level (e.g.,
LOUDNESS MID
) ap-
pears in the display.
#
To turn loudness off, press
b
.
3
Press
c
or
d
to select a desired level.
LOW
(low)
—
MID
(mid)
—
HIGH
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Press SW to select SUBWOOFER.
#
You can also select the subwoofer setting
menu by pressing
AUDIO
on the unit.
2
Press
a
to turn subwoofer output on.
SUBWOOFER NOR
appears in the display.
Subwoofer output is now on.
#
If the subwoofer output phase has been set to
the reverse,
SUBWOOFER REV
will be displayed.
#
To turn subwoofer output off, press
b
.
3
Press
c
or
d
to select the phase of sub-
woofer output.
Press
c
to select reverse phase and
REV
ap-
pears in the display. Press
d
to select normal
phase and
NOR
appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1
Press SW to select SUBWOOFER.
#
You can also select the subwoofer setting
menu by pressing
AUDIO
on the unit.
#
When the subwoofer output is on, you can se-
lect
SUBWOOFER
(subwoofer setting).
2
Press
c
or
d
to select cut-off frequency.
50
—
63
—
80
—
100
—
125
(Hz)
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
3
Press
a
or
b
to adjust the output level
of the subwoofer.
+6
to
–
24
is displayed as the level is increased
or decreased.
Operating this unit
En
19
English
Section
02