Listening to the radio
5
5
5 4
4
4
3
3
3
2
2
2
1
1
1
1
Band indicator
Shows which band the radio is tuned to, AM
or FM.
2
Frequency indicator
Shows the frequency to which the tuner is
tuned.
3
Preset number indicator
Shows which preset has been selected.
4
LOC indicator
Shows when local seek tuning is on.
5
Stereo (
5
) indicator
Shows when the selected frequency is
being broadcast in stereo.
1
Press SOURCE to select the tuner.
Press
SOURCE
until you see
TUNER
dis-
played.
2
Press BAND to select a band.
Press
BAND
until the desired band (
F1
,
F2
,
F3
for FM or
AM
) is displayed.
3
To perform manual tuning, briefly press
c
or
d
.
4
To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
c
or
d
.
#
If you press and hold
c
or
d
you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Introduction of advanced
tuner operation
%
Press FUNCTION to display the function
names.
Press
FUNCTION
repeatedly to switch be-
tween the following functions:
BSM
(best stations memory)
—
LOCAL
(local
seek tuning)
#
To return to the frequency display, press
BAND
.
#
If you do not operate the function within about
30 seconds, the display is automatically returned
to the frequency display.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
1
to
6
you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
!
Up to 18 FM stations, six for each of the
three FM bands, and six AM stations can
be stored in memory.
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
#
You can also use
a
and
b
to recall radio sta-
tion frequencies assigned to preset tuning but-
tons
1
to
6
.
Tuner
En
10
Section
03
