background image

3

5

6

7

8

F

E

D

C

B

A

5

6

7

8

DEH-P2550/XM/ES

-

CD Player Service Precautions

1. Before disassembling the unit, be sure to turn off the

power. Unplugging and plugging the connectors dur-

ing power-on mode may damage the ICs inside the

unit.

2. To protect the pickup unit from electrostatic dis-

charge during serviving, take an appropriate treat-

ment(shorting-solder) by referring to "the DISAS-

SEMBLY" on page 41.

3. After replacing the pickup unit, be sure to check the

grating.(See p.38.)

CONTENTS

SAFETY INFORMATION ............................................................................................................................................2

1. SPECIFICATIONS .......................................................................................................................................................4

2. EXPLODED VIEWS AND PARTS LIST.......................................................................................................................5

2.1 PACKING...............................................................................................................................................................5

2.2 EXTERIOR.............................................................................................................................................................6

2.3 CD MECHANISM MODULE .................................................................................................................................8

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...................................................................................................10

3.1 BLOCK DIAGRAM ..............................................................................................................................................10

3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE) ........................................................................................12

3.3 KEYBOARD UNIT ...............................................................................................................................................18

3.4 CD MECHANISM MODULE ...............................................................................................................................20

4. PCB CONNECTION DIAGRAM ................................................................................................................................24

4.1 TUNER AMP UNIT .............................................................................................................................................24

4.2 PANEL UNIT .......................................................................................................................................................28

4.3 KEYBOARD UNIT ...............................................................................................................................................29

4.4 CD MECHANISM MODULE ...............................................................................................................................30

5. ELECTRICAL PARTS LIST ........................................................................................................................................32

6. ADJUSTMENT .........................................................................................................................................................36

6.1 CD ADJUSTMENT .............................................................................................................................................36

6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT................................................................38

6.3 ERROR MODE ....................................................................................................................................................40

7. GENERAL INFORMATION .......................................................................................................................................41

7.1 DIAGNOSIS ........................................................................................................................................................41

7.1.1 DISASSEMBLY ..............................................................................................................................................41

7.1.2 CONNECTOR FUNCTION DESCRIPTION ....................................................................................................43

7.2 PARTS .................................................................................................................................................................44

7.2.1 IC ....................................................................................................................................................................44

7.2.2 DISPLAY.........................................................................................................................................................52

7.3 OPERATIONAL FLOW CHART...........................................................................................................................53

7.4 CLEANING ..........................................................................................................................................................54

8. OPERATIONS ...........................................................................................................................................................55

Summary of Contents for DEH-P2550 XN/ES




























































Reviews: