Pioneer DEH-7300BT, Operation Manual

Page: 6 / 28

Removing the front panel to protect your unit from
theft
1
Press the detach button to release the front
panel.
2
Push the front panel upward and pull it toward
you.
3
Always keep the detached front panel in a protec-
tion device such as a protection case.
Re-attaching the front panel
1
Slide the front panel to the left.
Make sure to insert the tabs on the left side of the
head unit into the slots on the front panel.
2
Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the head
unit successfully, make sure that you are placing
the front panel onto the head unit correctly. For-
cing the front panel into place may result in da-
mage to the front panel or head unit.
Turning the unit on
1
Press S (SRC / OFF) to turn the unit on.
Turning the unit off
1
Press and hold S (SRC / OFF) until the unit turns
off.
Selecting a source
1
Press S (SRC / OFF) to cycle between:
TUNER (tuner)
—
CD (built-in CD player)
—
USB
(USB)/ iPod (iPod)
—
AUX (AUX)
Adjusting the volume
1
Turn M.C. to adjust the volume.
CAUTION
For safety reasons, park your vehicle when remov-
ing the front panel.
Note
When this unit
’
s blue/white lead is connected to
the vehicle
’
s auto-antenna relay control terminal,
the vehicle
’
s antenna extends when this unit
’
s
source is turned on. To retract the antenna, turn
the source off.
Using Bluetooth telephone
Important
!
Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine run-
ning can drain the battery power.
!
Operations may vary depending on the kind of
cellular phone.
!
Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe place
when using these advanced operations.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
1
Connection
Operate the Bluetooth telephone connection
menu. Refer to
Connection menu operation on
page 13.
2
Function settings
Operate the Bluetooth telephone function menu.
Refer to
Phone menu operation on page 14.
Basic Operations
Making a phone call
1
Refer to Phone menu operation on page 14.
Answering an incoming call
1
When a call is received, press M.C.
Ending a call
1
Press .
En
6
Section
02
Operating this unit