Pioneer DEH-6400BT, Operation Manual

Page: 8 / 36

Tuner
Basic operations
a 8 9
3 4 6 1 2 7 5
RDS
b
3 4 1 2 7 5
Non-RDS or MW/LW
1
TAG indicator
2
Tags transferring indicator
3
Band indicator
4
5
(stereo) indicator
5 LOC
indicator
Appears when local seek tuning is on.
6
Preset number indicator
7
Signal level indicator
8
TEXT indicator
Shows when the radio text is received.
9
PTY label indicator
a
Program service name
b
Frequency indicator
Selecting a band
1
Press BAND / until the desired band ( FM-1 , FM-
2 , FM-3 for FM or MW/LW ) is displayed.
Manual tuning (step by step)
1
Turn
LEVER
.
Seeking
1
Turn and hold down LEVER .
!
While turning and holding down LEVER , you
can skip stations. Seek tuning starts as soon
as you release
LEVER .
Using PI Seek
If the tuner cannot find a suitable station, or
the reception status deteriorates, the unit
automatically searches for a different station
with the same programming. During the
search,
PI seek is displayed and the sound is
muted.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during pre-
set recall.
!
The default setting for Auto PI Seek is off.
Refer to
Auto PI (auto PI seek) on page 20.
Storing and recalling stations
for each band
1 Press (list).
The preset screen is displayed.
2 Use M.C. to store the selected fre-
quency in the memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station. Press to select.
#
All stations stored for FM bands can be re-
called from each independent FM band.
#
You can tune the channel up or down manu-
ally by pressing or .
#
Press BAND / or (list) to return to the or-
dinary display.
Switching the RDS display
RDS (radio data system) contains digital infor-
mation that helps search for the radio sta-
tions.
%
Press /DISP.
PTY information and frequency or program
service name
—
song title and artist name
En
8
Section
02
Operating this unit