Pioneer DEH-6400BT, Operation Manual

Page: 6 / 36

1 After installation of this unit, turn the
ignition switch to ON.
SET UP
appears.
2 Turn M.C. to switch to YES.
#
If you do not operate for 30 seconds, the set
up menu will not be displayed.
#
If you prefer not to set up at this time, turn
M.C. to switch to NO .
If you select NO , you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to
set the menu.
To proceed to the next menu option, you need
to confirm your selection.
Language select (multi-language)
1
Turn M.C. to select the desired language.
English
—
Français
—
Italiano
—
Español
—
Deutsch
—
Nederlands
— РУССКИЙ
2
Press M.C. to confirm the selection.
Calendar (setting the date)
1
Turn M.C. to change the year.
2
Press
M.C.
to select day.
3
Turn M.C. to change the day.
4
Press
M.C.
to select month.
5
Turn M.C. to change the month.
6
Press M.C. to confirm the selection.
Clock (setting the clock)
1
Turn
M.C.
to adjust hour.
2
Press M.C. to select minute.
3
Turn M.C. to adjust minute.
4
Press M.C. to confirm the selection.
FM step (FM tuning step)
1
Turn M.C. to select the FM tuning step.
50kHz (50 kHz)
—
100kHz (100 kHz)
2
Press M.C. to confirm the selection.
Contrast (display contrast setting)
1
Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or de-
creased.
2
Press M.C. to confirm the selection.
Demonstration
(demo display setting)
1
Turn
M.C.
to set the demo display to off.
2
Press M.C. to confirm the selection.
Quit
appears.
5 To finish your settings, turn M.C. to se-
lect YES.
#
If you prefer to change your setting again, turn
M.C.
to switch to
NO
.
6 Press M.C. to select.
Notes
!
Because demonstration mode is the function
for displaying at stores, do not use this func-
tion while driving.
!
You can set up the menu options in the initial
settings. For details about the settings, refer to
Initial settings on page 20.
!
You can cancel set up menu by pressing
SRC
/
OFF .
Basic operations
Important
!
Handle gently when removing or attaching
the front panel.
!
Avoid subjecting the front panel to excessive
shock.
!
Keep the front panel out of direct sunlight and
high temperatures.
!
To avoid damaging the device or vehicle inter-
ior, remove any cables and devices attached
to the front panel before detaching it.
En
6
Section
02
Operating this unit