Pioneer DEH-6400BT, Operation Manual

Page: 15 / 36

!
The following functions are still accessible
from the unit even if the control mode is set to
iPod / APP .
—
Pausing
—
Fast forward/reverse
—
Track up/down
!
When the control mode is set to
iPod
/
APP
,
only
Pause
or
Sound Retriever
is available.
!
The browse function cannot be operated from
this unit.
Audio adjustments
1
1
Audio display
Shows the audio adjustment status.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
Fader/Balance (fader/balance adjustment)
1
Press M.C. to display the setting mode.
2
Press
M.C.
to cycle between fader (front/rear) and
balance (left/right).
3
Turn
M.C.
to adjust the front/rear speaker bal-
ance.
!
The front/rear speaker balance cannot be ad-
justed when the rear output setting is
Rear
SP :S/W . Refer to S/W control (rear output
and subwoofer setting) on page 21.
4
Turn M.C. to adjust the left/right speaker balance.
Preset EQ (equalizer recall)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select an equalizer curve.
Powerful
—
Natural
—
Vocal
—
Custom1
—
Cus-
tom2
—
Flat
—
Super bass
G.EQ
(equalizer adjustment)
You can adjust the currently selected equalizer curve
setting as desired. Adjusted equalizer curve settings
are stored in
Custom1 or Custom2 .
!
A separate Custom1 curve can be created for
each source. If you make adjustments when a
curve other than
Custom2 is selected, the equali-
zer curve settings will be stored in
Custom1
.
!
A Custom2 curve that is common for all sources
can be created. If you make adjustments when
the
Custom2 curve is selected, the Custom2
curve will be updated.
1
Recall the equalizer curve you want to adjust.
2
Press M.C. to display the setting mode.
3
Press
M.C.
to cycle between equalizer band and
level.
4
Turn
M.C.
to select the equalizer band to adjust.
100Hz
—
315Hz
—
1.25kHz
—
3.15kHz
—
8kHz
Turn M.C. to adjust the equalizer curve.
+6 to
–
6 is displayed as the equalizer curve is in-
creased or decreased.
Loudness (loudness)
Loudness compensates for deficiencies in the low-fre-
quency and high-frequency ranges at low volume.
1
Press M.C. to display the setting mode.
2
Press
M.C.
to turn loudness on or off.
3
Turn M.C. to select the desired setting.
Low
(low)
—
Mid
(mid)
—
High
(high)
Subwoofer1
(subwoofer on/off setting)
This unit is equipped with a subwoofer output which
can be turned on or off.
1
Press
M.C.
to display the setting mode.
2
Press M.C. to turn subwoofer output on or off.
3
Turn
M.C.
to select the phase for the subwoofer
output.
Turn
M.C. to the left to select reverse phase, and
Reverse appears in the display. Turn M.C. to the
right to select normal phase, and Normal appears
in the display.
Subwoofer2
(subwoofer adjustment)
En
15
Section
02
Operating
this
unit
Operating this unit