Pioneer DEH-6400BT, Operation Manual

Page: 10 / 36

!
The tuner automatically stores the three lat-
est radio text broadcasts received, repla-
cing the oldest text with the newest text.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
!
If MW/LW band is selected, only BSM ,
Local and Tuning Mode are available.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1
Press M.C. to turn BSM on.
To cancel, press M.C. again.
Regional (regional)
When
Alternative FREQ
is used, the regional func-
tion limits the selection of stations to those broad-
casting regional programs.
1
Press M.C. to turn the regional function on or off.
Local (local seek tuning)
Local seek tuning lets you tune in to only those radio
stations with sufficiently strong signals for good re-
ception.
1
Press M.C. to turn local on.
!
To cancel, press M.C. again.
2
Turn
LEVER
left or right to select the desired set-
ting.
FM:
Level 1
—
Level 2
—
Level 3
—
Level 4
MW/LW: Level 1
—
Level 2
The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.
PTY search (program type selection)
You can tune in to a station using PTY (program type)
information.
1
Turn
LEVER
left or right to select the desired set-
ting.
News&Inf
—
Popular
—
Classics
—
Others
2
Press M.C. to begin the search.
The unit searches for a station broadcasting that
type of program. When a station is found, its pro-
gram service name is displayed.
PTY (program type ID code) information is listed
in the following section. Refer to
PTY list on the
previous page.
To cancel the search, press
M.C. again.
The program of some stations may differ from
that indicated by the transmitted PTY.
If no station is broadcasting the type of program
you searched for,
Not found is displayed for
about two seconds and then the tuner returns to
the original station.
Traffic Announce (traffic announcement standby)
1
Press M.C. to turn traffic announcement standby
on or off.
Alternative FREQ (alternative frequencies search)
When the tuner cannot get a good reception, the unit
automatically searches for a different station in the
same network.
1
Press M.C. to turn the alternative frequencies
search on and off.
News interrupt (news program interruption)
1
Press M.C. to turn the NEWS function on or off.
Tuning Mode (LEVER tuning setting)
You can assign a function to the LEVER on the unit.
Select Manual (manual tuning) to tune up or down
manually or select
Preset
(preset channel) to switch
between preset channels.
1
Press
M.C.
to select
Manual
or
Preset
.
En
10
Section
02
Operating this unit