Important
!
Do not store the remote control in high tem-
peratures or direct sunlight.
!
The remote control may not function properly
in direct sunlight.
!
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Using Bluetooth telephone
Important
!
Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine run-
ning can drain the battery power.
!
Operations may vary depending on the kind of
cellular phone.
!
Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe place
when using these advanced operations.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
1
Connection
Operate the Bluetooth telephone connection
menu. Refer to
2
Function settings
Operate the Bluetooth telephone function menu.
Refer to
Basic Operations
Making a phone call
1
Refer to
Answering an incoming call
1
When a call is received, press
M.C.
!
You can also perform this operation by push-
ing
M.C.
Ending a call
1
Press
PHONE
/
/
CONNECT
.
Rejecting an incoming call
1
When a call is received, press
PHONE
/
/
CON-
NECT
.
Answering a call waiting
1
When a call is received, press
M.C.
!
You can also perform this operation by push-
ing
M.C.
Switching between callers on hold
1
Press
M.C.
Canceling call waiting
1
Press
PHONE
/
/
CONNECT
.
Adjusting the other party
’
s listening volume
1
Push
M.C.
up or down while talking on the
phone.
Turning private mode on and off.
1
Press
BAND
/
ESC
while talking on the phone.
Switching the information display
1
Press
/
DISP
/
SCRL
while talking on the phone.
!
Press and hold
/
DISP
/
SCRL
to scroll.
Notes
!
If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
!
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
En
8
Section
02
Operating this unit
