Sound Retriever
(sound retriever)
!
Refer to
Sound Retriever
(sound retriever)
on
page 11.
Notes
!
Switching the control mode to
iPod
pauses
song playback. Operate the iPod to resume
playback.
!
The following functions are still accessible
from the unit even if the control mode is set to
iPod
.
—
Volume
—
Fast forward/reverse
—
Track up/down
—
Pausing
—
Switching the text information
!
When the control mode is set to
iPod
, opera-
tions are limited as follows:
—
Only
Control mode
(control mode),
PAUSE
(pause) and
Sound Retriever
(sound retriever) functions are available.
—
Browse function cannot be operated from
this unit.
Audio Adjustments
1
1
Audio display
Shows the audio adjustment status.
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select AUDIO.
3
Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
Fader/Balance
(fader/balance adjustment)
1
Push
M.C.
up or down to adjust front/rear speaker
balance.
F15
to
R15
is displayed as the front/rear speaker
balance moves from front to rear.
!
F/R 0
is the proper setting when only two
speakers are used.
!
When the rear output setting is
Rear SP :S/W
,
you cannot adjust front/rear speaker balance.
Refer to
S/W control
(rear output and subwoo-
fer setting)
on page 16.
2
Push
M.C.
left or right to adjust left/right speaker
balance.
L15
to
R15
is displayed as the left/right speaker
balance moves from left to right.
Powerful
(equalizer recall)
1
Push
M.C.
left or right to select an equalizer
curve.
Powerful
—
Natural
—
Vocal
—
Custom1
—
Cus-
tom2
—
Flat
—
S.Bass
!
When
Flat
is selected no adjustments are
made to the sound.
100 Hz
(equalizer adjustment)
You can adjust the currently selected equalizer curve
setting as desired. Adjusted equalizer curve settings
are memorized in
Custom1
or
Custom2
.
!
A separate
Custom1
curve can be created for
each source. If you make adjustments when a
curve other than
Custom2
is selected, the equali-
zer curve settings will be memorized in
Custom1
.
!
A
Custom2
curve can be created common to all
sources. If you make adjustments when the
Cus-
tom2
curve is selected, the
Custom2
curve will
be updated.
1
Recall the equalizer curve you want to adjust.
2
Push
M.C.
left or right to select the equalizer
band to adjust.
100Hz
—
315Hz
—
1.25kHz
—
3.15kHz
—
8kHz
3
Push
M.C.
up or down to adjust the equalizer
curve.
+6
to
–
6
is displayed as the equalizer curve is in-
creased or decreased.
LOUD
(loudness)
Loudness compensates for deficiencies in the low-
and high-frequency ranges at low volume.
1
Press
M.C.
to turn loudness on or off.
2
Push
M.C.
left or right to select the desired set-
ting.
Low
(low)
—
Mid
(mid)
—
High
(high)
—
OFF
(off)
Sub W.1
(subwoofer on/off setting)
Operating this unit
En
14
Section
02