Pioneer DEH-50UB, Operation Manual

Page: 12 / 77

!
To return to the ordinary display, press
BAND/ESC
.
!
If MW/LW band is selected, you can only se-
lect
BSM or LOCAL .
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.
1 Use MULTI-CONTROL to select BSM in
the function menu.
2 Press MULTI-CONTROL to turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
#
To cancel, press MULTI-CONTROL again.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
%
Press LOC repeatedly to select the de-
sired setting.
FM: OFF
—
LEVEL1
—
LEVEL2
—
LEVEL3
—
LEVEL4
MW/LW: OFF
—
LEVEL1
—
LEVEL2
The LEVEL4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Note
You can also perform this operation in the menu
that appears by using
MULTI-CONTROL .
Selecting alternative frequencies
When the tuner cannot get a good reception,
the unit automatically searches for a different
station in the same network.
1 Use MULTI-CONTROL to select AF in the
function menu.
2 Press MULTI-CONTROL to turn AF on.
#
To turn off, press
MULTI-CONTROL
again.
Notes
!
Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
!
When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the station
’
s AF list. No preset
number appears on the display if the RDS
data for the station received differs from that
of the originally stored station.
!
During AF search, sound may be temporarily
interrupted.
!
AF can be turned on or off independently for
each FM band.
Using PI Seek
If the tuner cannot find a suitable station, or
reception status becomes bad, the unit auto-
matically searches for a different station with
the same programming. During the search,
PI SEEK is displayed and the output is muted.
Using Auto PI Seek for preset stations
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during pre-
set recall.
!
The default setting for Auto PI Seek is off.
See
Switching Auto PI Seek on page 28.
Limiting stations to regional
programming
When AF is used, the regional function limits
the selection of stations broadcasting regional
programs.
1 Use MULTI-CONTROL to select
REGIONAL in the function menu.
2 Press MULTI-CONTROL to turn the re-
gional function on.
#
To turn off, press MULTI-CONTROL again.
Operating this unit
En
12
Section
02