Pioneer DEH-4450BT, Owner'S Manual

Page: 5 / 104

WARNING
!
Keep the battery out of the reach of children.
Should the battery be swallowed, consult a
doctor immediately.
!
Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such
as sunshine, fire or the like.
CAUTION
!
Use one CR2025 (3 V) lithium battery.
!
Remove the battery if the remote control is
not used for a month or longer.
!
There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
!
Do not handle the battery with metallic tools.
!
Do not store the battery with metallic ob-
jects.
!
If the battery leaks, wipe the remote control
completely clean and install a new battery.
!
When disposing of used batteries, comply
with governmental regulations or environ-
mental public institutions
’
rules that apply in
your country/area.
Important
!
Do not store the remote control in high tem-
peratures or direct sunlight.
!
The remote control may not function properly
in direct sunlight.
!
Do not let the remote control fall onto the
floor, where it may become jammed under
the brake or accelerator pedal.
Using Bluetooth telephone
Important
!
Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine run-
ning can drain the battery power.
!
Operations may vary depending on the kind
of cellular phone.
!
Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe
place when using these advanced opera-
tions.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
1
Connection
Operate the Bluetooth telephone connection
menu. Refer to
Connection menu operation on
page 9.
2
Function settings
Operate the Bluetooth telephone function
menu. Refer to
Phone menu operation on page
10.
Basic operations
Making a phone call
1
Refer to Phone menu operation on page 10.
Answering an incoming call
1
When a call is received, press M.C.
Ending a call
1
Press .
Rejecting an incoming call
1
When a call is received, press .
Answering a call waiting
1
When a call is received, press M.C.
Switching between callers on hold
1
Press M.C.
Canceling call waiting
1
Press .
Adjusting the other party
’
s listening volume
1
Press
c
or
d
while talking on the phone.
!
When private mode is on, this function is not
available.
Turning private mode on or off
1
Press BAND / while talking on the phone.
Switching the information display
1
Press while talking on the phone.
Notes
!
If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
!
The estimated call time appears in the dis-
play (this may differ slightly from the actual
call time).
Menu operations identical
for set up menu/function
settings/audio adjustments/
initial settings/lists
Returning to the previous display
Returning to the previous list (the folder one level
higher)
1
Press .
Returning to the ordinary display
Canceling the initial setting menu/set up menu
1
Press BAND / .
Returning to the ordinary display from the list
1
Press BAND / .
Tuner
Basic operations
Selecting a band
1
Press BAND / until the desired band ( FM1 ,
FM2
,
FM3
for FM,
MW
or
SW1
,
SW2
for short-
wave) is displayed.
Recalling preset stations
1
Press
c
or
d
.
!
If MAN (manual tuning) is selected in SEEK ,
you cannot recall preset stations. You need to
select
PCH (preset channel) in SEEK . For de-
tails about the settings, refer to SEEK (left/right
key setting) on the next page.
Manual tuning (step by step)
1
Press
c
or
d
.
!
If PCH (preset channel) is selected in SEEK ,
you cannot tune up or down manually. You
need to select
MAN
(manual tuning) in
SEEK
.
For details about the settings, refer to
SEEK
(left/right key setting) on the next page.
Seeking
1
Press and hold
c
or
d
, and then release.
You can cancel seek tuning by briefly pressing
c
or
d
.
While pressing and holding c or d , you can
skip stations. Seek tuning starts as soon as
you release
c
or
d
.
Note
This unit
’
s AF (alternative frequencies search)
function can be turned on and off. AF should be
off for normal tuning operation (refer to
AF (al-
ternative frequencies search) on the next page).
English
Operating this unit
5
Section
Operating this unit
En
02