Using Bluetooth wireless
technology
Connection menu operation
Important
!
Be sure to park your vehicle in a safe place
and apply the parking brake when performing
this operation.
!
Connected devices may not operate properly if
more than one is connected at a time. Con-
necting one device at a time is recommended.
1
Press and hold
to display the con-
nection menu.
#
You cannot operate this step during a call.
2
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
!
When the control mode is set to
CTRL iPod
/
CTRL APP
, only
PAUSE
or
S.RTRV
is avail-
able.
DEVICELIST
(connecting or disconnecting a device
from the device list)
!
When no device is selected in the device list, this
function is not available.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the name of a device you want
to connect/disconnect.
!
Press and hold
M.C.
to switch the Bluetooth
device address and device name.
3
Press
M.C.
to connect/disconnect the selected de-
vice.
If the connection is established,
*
is indicated on
the device name.
DEL DEVICE
(deleting a device from the device list)
!
When no device is selected in the device list, this
function is not available.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the name of a device you want
to delete.
!
Press and hold
M.C.
to switch the Bluetooth
device address and device name.
3
Press
M.C.
to display
DELETE YES
.
4
Press
M.C.
to delete a device information from
the device list.
!
While this function is in use, do not turn off the
engine.
ADD DEVICE
(connecting a new device)
1
Press
M.C.
to start searching.
!
To cancel, press
M.C.
while searching.
2
Turn
M.C.
to select a device from the device list.
!
If the desired device is not displayed, select
RE-SEARCH
.
!
6-digit number appears on the display of this
unit. Once the connection is established, this
number disappears.
!
Press and hold
M.C.
to switch the Bluetooth
device address and device name.
3
Press
M.C.
to connect the selected device.
!
To complete the connection, check the device
name (
DEH-4400BT
) and enter the PIN code
on your device.
!
PIN code is set to
0000
as the default. You
can change this code.
!
If you are unable to complete the connection
using this unit, use the device to connect to
the unit.
!
If 3 devices are already paired,
DEVICEFULL
is
displayed and it is not possible to perform this
operation. In this case, delete a paired device
first.
SPCLDEVICE
(setting a special device)
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your
Bluetooth device is listed as a special device, select
the appropriate one.
1
Press
M.C.
to display the setting mode.
!
If 3 devices are already paired,
DEVICEFULL
is
displayed and it is not possible to perform this
operation. In this case, delete a paired device
first.
2
Turn
M.C.
to display a special device. Press to se-
lect.
3
Turn
M.C.
to display this unit
’
s device name,
Bluetooth device address and PIN code.
4
Use a device to connect to this unit.
!
To complete the connection, check the device
name (
DEH-4400BT
) and enter the PIN code
on your device.
!
PIN code is set to
0000
as the default. You
can change this code.
A. CONN
(connecting to a Bluetooth device automati-
cally)
1
Press
M.C.
to turn automatic connection on or
off.
VISIBLE
(setting the visibility of this unit)
En
14
Section
02
Operating this unit
130.com.ua
Autogood products «130»
