#
FAD 0
is the proper setting when only two
speakers are used.
3 Press
c
or
d
to adjust left/right speaker
balance.
BAL L 9
BAL R 9
is displayed as the left/right
speaker balance moves from left to right.
Using the equalizer
There are six stored equalizer settings such as
DYNAMIC
,
VOCAL
,
NATURAL
,
CUSTOM
,
FLAT
and
POWERFUL
that can easily be re-
called at any time.
!
CUSTOM
is an adjusted equalizer curve
that you create.
!
When
FLAT
is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT
and a set equalizer curve.
%
Press EQ to select the equalizer.
Press
EQ
repeatedly to switch between the fol-
lowing equalizers:
DYNAMIC
VOCAL
NATURAL
CUSTOM
FLAT
POWERFUL
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
CUSTOM
.
Adjusting bass/mid/treble
You can adjust the bass/mid/treble level.
1 Press AUDIO to select BASS/MID/
TREBLE.
2 Press
a
or
b
to adjust the level.
+6
6
is displayed as the level is increased
or decreased.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD.
2 Press
a
to turn loudness on.
LOUD
indicator is displayed.
#
To turn loudness off, press
b
.
#
You can also turn loudness on or off by press-
ing and holding
EQ
.
3 Press
c
or
d
to select a desired level.
LOW
(low)
HI
(high)
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the FM tuner volume
level, which remains unchanged.
!
The MW/LW tuner volume level can also be
adjusted with source level adjustments.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
3 Press
a
or
b
to adjust the source vo-
lume.
SLA +4
SLA
4
is displayed as the source vo-
lume is increased or decreased.
Operating this unit
En
14
Section
03
