Pioneer DEH-10 Service Manual Download Page 68

Page: 68 / 73

DEH-1000,10,1050

Audio Menu Functions

The Audio Menu features the following functions.

Balance Adjustment (FADER)

This function allows you to select a Fader/Balance setting that provides ideal listening con-
ditions in all occupied seats.

1. Press the AUDIO button and select Fader/Balance mode (FADER) in the

Audio Menu.

Note:

• “FADER 0” is the proper setting when 2 speakers are in use.

Equalizer Curve Adjustment (EQ-LOW/MID/HIGH)

You can adjust equalizer curve settings as desired. Adjusted equalizer curve settings are
memorized in “CUSTOM”.

1. Press the AUDIO button and select the Equalizer mode

(EQ-LOW/MID/HIGH) in the Audio Menu.

Note:

• If you make adjustments when a curve other than “CUSTOM” is selected, the adjusted curve is

stored in memory as a “CUSTOM” curve. Also, the displayed curve switches to that selected before
adjustments were made.

3. Boost or attenuate the selected

band with the

∞

buttons.

The display shows “+6” – “–6”.

2. Select the band you want to

adjust with the

buttons.

EQ-LOW

EQ-MID

EQ-HIGH

3. Adjust left/right speaker bal-

ance with the

buttons.

“BAL L 9” – “BAL R 9” is displayed
as it moves from left to right.

2. Adjust front/rear speaker bal-

ance with the

∞

buttons.

“FADER F15” – “FADER R15” is
displayed as it moves from front to
rear.

Summary of Contents for DEH-10










































































Search results

Summary of Contents for DEH-10

Reviews:

Related manuals for DEH-10

Brands by name

Popular brands

Pioneer DEH-10, Service Manual

Search results

Summary of Contents for DEH-10

Reviews:

Related manuals for DEH-10

Brands by name

Popular brands