35
CT-IS21
System ...................................................... 4-track, 2-channel stereo
Heads .................................................................... “Hard Permalloy”
recording/playback head
×
1
“Ferrite” erasing head
×
1
Motor ................................................................ DC servo motor
×
2
Wow and Flutter ........................................................ *0.1% (WRMS)
Frequency Response
–20 dB recording:
TYPE II (High/CrO
2
) tape .............. *35 Hz to 15,000 Hz
±
4 dB
TYPE I (Normal) tape ................... *35 Hz to 14,000 Hz
±
4 dB
Signal-to-Noise Ratio
Dolby NR OFF ............................................................. *55 dB
(peak recording level, audible compensation TYPE II)
Noise Reduction Effect
Dolby NR ON .......................... 10 dB compensation at 5 kHz
Input (Sensitivity)
REC ................................... 100 mV (Input impedance 53 k
Ω
)
Output (Reference level)
PLAY ..................................... 0.5 V (Output impedance 2 k
Ω
)
Power Requirements
NV type ............................................................. AC 230 V, 50/60 Hz
MY type ................................................... AC 220 ~ 230 V, 50/60 Hz
RBD type ................................................ AC 110 ~ 127/220 ~ 240 V
(switchable), 50/60 Hz
Power Consumption ................................................................ 12 W
Power Consumption in standby mode ........................................ 3 W
Dimensions ...................................... 210 (W)
×
75 (H)
×
290 (D) mm
Weight (without package) ....................................................... 2.6 kg
* Values measured in accordance with EIAJ standards.
Accessories
Operating instructions
NV type .......................................................................................... 1
MY type .......................................................................................... 2
RBD type ........................................................................................ 1
RCA pin-plug stereo cable .............................................................. 2
System cable .................................................................................. 1
NOTE:
Specifications and design subject to possible modifications without
notice, due to improvements.
Energy-Saving Design
This product has been designed to reduce energy con-
sumption when the unit is in the power off (standby)
mode.
¶
Consult the Specifications for the power consumption
in standby mode.
1
STANDBY/ON button and standby indicator
This is the power switch.
ON
: When set to the ON position, power is supplied and the
unit becomes operational.
STANDBY : When set to the STANDBY position, the main power flow
is cut and the unit is no longer fully operational. A minute
flow of power feeds the unit to maintain operation readi-
ness.
NOTE:
When the Stereo Cassette Deck CT-IS21 is connected to
the XC-IS21MD or XC-IS21T via the system cable, the unit’s
power will be switched on/off (standby) automatically by
operating the STANDBY/ON button of either of the connected
units.
2
Recording-pause button (
¶8
)
3
REC (recording) indicator
4
ASES button
5
Play indicator
6
Play buttons and direction indicators (
2
,
3
)
7
Reverse mode indicators
8
Fast forward/reverse buttons(
1
,
¡
)
9
Cassette tray
0
OPEN/CLOSE button (
0
)
-
STOP button(
7
)
=
DOLBY* NR button and indicator
*
¶
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
¶
“DOLBY” and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
~
REVERSE MODE button
SPECIFICATIONS
Accessories
System Cable
×
1
(ADE7032)
RCA Pin-plug Stereo Cable
×
2
(ADE7034) (L=50 cm)
White
Red
