Pioneer CRD3569-A, Operation Manual

Page: 44 / 124

Initial Settings
Adjusting initial settings
Initial settings lets you perform initial set up of
different settings for this unit.
1
FUNCTION
display
Shows the function status.
1 Press
SOURCE
and hold until the unit turns
off.
2 Press
OPEN
to open the front panel.
3 Press
FUNCTION
and hold until
CLOCK
appears in the display.
4 Press
FUNCTION
to select one of the initial
settings.
Press
FUNCTION
repeatedly to switch between
the following settings:
CLOCK
—
WARN
—
D OPEN
—
AUX
—
DIM
—
BRIGHT
—
SW
—
TEL
—
DISP
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
BAND
.
• You can also cancel initial settings by holding
down
FUNCTION
until the unit turns off.
Setting the time
This is used to set the time on the unit’s clock
display.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
CLOCK
.
Press
FUNCTION
until the time appears in the
display.
3 Select the portion of the time display you
wish to set with
2
/
3
.
Pressing
2
/
3
will select a portion of the clock
display:
HOUR
—
MINUTE
As you select portions of the clock display the
portion selected will blink.
4 Select the correct time with
5
/
∞
.
Pressing
5
will increase the selected hour or
minute. Pressing
∞
will decrease the selected
hour or minute.
1
En
44
08
Section