Pioneer CNSD-130FM, Upgrade Instructions

Page: 48 / 144

Setting a route to your
destination
1 Search for a location.
=
For details, refer to Chapter 8.
After searching for the destination, the Lo-
cation confirmation screen appears.
2 Touch [OK].
Location confirmation screen
The destination is set, and then route calcula-
tion starts.
When the route calculation is completed,
Route confirmation screen appears.
p
If you press the
MODE
button during route
calculation, the calculation is canceled and
the map screen appears.
#
Touch [ Scroll ].
The map display changes to the scroll mode. You
can fine-tune the location in the scroll mode, and
then you can set the location as your destination
or do various operations.
#
Touch [ Waypoint ].
The location is added to the
“
Waypoints List
”
screen.
p
If a destination is not set, [ Waypoint ] is not
available.
3 Touch [OK].
Route confirmation screen
1 2 3 4
The displayed route is set as your route, and
the route guidance starts.
1
Distance to the destination
2
Travel time to your destination
3
Estimated fuel cost to your destination
=
For details, refer to Inputting the fuel
consumption information for calculating
the fuel cost
on page 74.
4
Route calculation condition
#
Touch .
The message confirming whether to cancel the
calculated route appears.
Touch [
Yes ] to cancel the calculated route, and
then the map screen appears.
2
3
1
1 Options
=
For details, refer to Modifying the route
calculation conditions on the next page.
2 Profile
=
For details, refer to Checking the current
itinerary on page 50.
3 Waypoints
=
For details, refer to Editing waypoints on
page 50.
En
48
Chapter
09
After the location is decided