Pioneer CLD-V5000, Programmer'S Reference Manual

Page: 12 / 92

The player is in Door Open before the disc is loaded into the disc tray. After the door
is closed, the player enters Park. When a START or PLAY command is input while
the player is in Park, the disc starts rotating and the player enters Spin Up . When
the player is ready to play images, it enters Random Access. Random Access is
further divided into Play , Still , Scan , Pause , Multi-Speed , Skip (Chapter and Track)
and Search.
When a REJECT command is received, the player enters Spin Down Mode. Image
playback stops immediately, and disc rotation is gradually stopped, then the player
enters
Park . Figure 2-B , describes how the active states change within the player.
Chapter Two • CLD-V5000 Level II
2-2
TP 121 v. 1.0 • 1/96
CLD-V5000 Level III User’s Manual
Normal Control Mode
using
P O W E R — O N
Front Panel Buttons
Remote Control
LaserBarcode Control
R S — 2 3 2 C
Test Mode
Turn ON (1) Bit 7 of Reg C. Not required
for normal player operation; used
primarily by service center personnel for
servicing the player.
REG. C
BIT 7=1
REG. C
BIT 7=0
Operating Modes
Figure 2-A
PLAY STILL SCAN
PAUSE
MULTI-SPEED
SEARCH
RANDOM ACCESS
OPEN
CLOSE
DOOR OPEN
PARK
SPIN UP
SPIN DOWN
Transitions Between Active States
Figure 2-B
SKIP
(Chapter/Track)