Pioneer CDJ-400 - Cd/Media Player, Service Manual

Page: 29 / 87

CDJ-400
29
5 6 7 8
5 6
7
8
C
D
F
A
B
E
6.2.5 List of Error Codes/Detail Display mode
If an error is generated during N ormal mode, one of the following error codes is displayed on the FL display.
Detailed error content (error described in the Error content column of the table below: E-XX) can be confirmed if the JOG
MODE key is pressed during Software
V ersion Check mode for the Player microcomputer.
Each time the JOG MODE key is pressed, the version number and error display are cyclically displayed.
The first error displayed when the JOG MODE key is pressed is the latest, and each time the LOOP DI
V IDE − key is pressed
the previous error is displayed (pressing the LOOP DI V IDE + key displays the oldest error). Data for up to 16 errors are stored
in memory.
For errors E-12 and E-15, the address (T N O:MI N :SEC:FRM) where an error was generated is also stored in memory, and it
can be displayed by pressing the TIME MODE key (toggle operation).
∗
If these errors are generated before the loaded disc is identified as a CD, the disc is automatically ejected. In this case, the error code is
not displayed, but you can check it, as the error content is stored in memory.
∗∗
Data for errors E-6002, E- 8 304, E- 8 305 and E- 8 709 are not stored in the memory.
To clear error logs, turn on the power while simultaneously holding the BACK and USB keys pressed.
In this case, the following settings are reset to the initial settings:
Note: A function for storing the CUE/LOOP point in memory is provided with this unit.
If error logs are cleared, CUE/LOOP-point data are also cleared. Therefore, be careful when using this mode.
Error No. Error Name Error Content
E-7201 TOC READ ERROR 26: TOC data could not be read.
E- 8 709 COMMU N ICATIO N ERROR
Communication between the microcomputers for the Display section and the Player
section could not be established.
∗∗
The program cannot be written in the DSP.
∗∗
E- 8 301
PLAYER ERROR
(Startup error)
E-6002
DSP PROGRAM
DO
WN LOAD ERROR
12: The desired address could not be searched.
15: Address data could not be read.
22: The Focus Servo could not be closed.
91: The pickup could not be returned to the inner track.
E- 8 302
PLAYER ERROR
(Abnormality in playback)
12: The desired address could not be searched.
15: Address data could not be read.
22: The Focus Servo could not be closed.
E- 8 303
PLAYER ERROR
(Abnormality in writing to the buffer)
99: Abnormality in writing in the buffer
E- 8 304
MP3 DECODE ERROR
(Abnormality in decoding)
Abnormality in decoding
∗∗
E- 8 305
DATA FORMAT ERROR
(Inappropriate data format)
A data format other than MP3 was used.
∗∗
E-9101 MECHA N ICAL TIME OUT 90: Abnormality in the disc-loading mechanism (TIMEOUT)
Setting Item Default Setting
AUTO CUE OFF
AUTO CUE LE V EL – 60dB
TIME MODE REMAI N
JOG MODE V I N YL
MASTER TEMPO OFF
TEMPO RA N GE
±
10%
JOG illumination pattern Pattern 1
MIDI channel Channel 1
∗