CDJ-200
54
1
2
3
4
1
2
3
4
C
D
F
A
B
E
This mode consists of Player Operation mode and Test Operation mode.
Player Operation mode
In this mode, basic operations of the servomechanism, such as setup, playback, pause, and track search, are checked.
Error rates can also be measured.
Test Operation mode
Servo operations can be controlled step by step in detail.
Notes:
• Switching from Player Operation mode to Test Operation mode can be accomplished by pressing the MASTER TEMPO key.
• Commands in Test Operation mode are mainly for testing the mechanism and servomechanism, not for testing the DJ
functions, such as scan and tempo.
Function
Key on the main unit
Play(trace) / Pause
PLAY/PAUSE
Track Search F/R
TRACK SEARCH
¢
/
4
Error Rate Count
CUE
Eject
EJECT
Mode Change
MASTER TEMPO
Function
Key on the main unit
Servo All Off
TIME
LD On/Off
TEMPO
Focus On/Off
RELOOP
Spindle Kick, Tracking On/Off
(LOOP) IN/REALTIME CUE
Tracking Off
(LOOP) OUT
Slide FWD (2mm)
SEARCH
¡
Slide REV (2mm)
SEARCH
1
Pickup Up/Down
AUTO CUE
Mode Change
MASTER TEMPO
3. Operation Check mode for the Player section
Player Operation mode: ON
Player Operation mode: CANCEL
TEXT MODE
JET
POWER OFF
Player
Operation
mode
Test
Operation
mode
POWER OFF
POWER ON
LED lit
MASTER TEMPO
MASTER TEMPO
LED unlit
• Player Operation mode
• Test Operation mode
• Description of commands in Player Operation mode
Play (trace)/Pause
If this command is issued in Stop mode, the unit is set up and starts playing. If the command is issued in Playback mode,
pause and playback are alternately performed each time the PLAY/PAUSE key is pressed. The address currently being
played back is displayed on the FL display.
Note:
In this mode, auto setup is not performed when a disc is inserted. Playback in this mode does not mean audio playback
but trace of the signal area on a disc. In playback, tracing is performed at double the speed of normal playback.
No audio signal is output.
