Installation manual CA-HM-UNI-EVO.006 | Version 1.0
Final product image
Slide the cover onto the screen and fix the screw
Install the neck cover onto the screen and fix the screws
Put the screw cover over it
17
19
20
18
Page 1: ...ncluded Install the sliding mecha with the supplied hardware Once finalised mount the complete bracket to the silver box using the supplied hex screws 1 2 4 3 SPH EVO93DAB KIT INSTALLATION 1 DIN réglable POUR CA HM UNI EVO 006 Habillage 1 DIN Habillage écran Cache connecteur Cage 1 DIN Pièces d ajustement Support écran Fixation écran Pattes métalliques ...
Page 2: ...e necessary screws Click the plastic tabs onto the metal holder as shown L R Whilst sliding the silver box in the car pull the display cable through using some tape and extension cable CD RGB150E not included install the metal holder you can adjust height and angle by using different positions Put the DIN cover over the unit By using the two top screws mount the screen holder to the screen 5 11 6 ...
Page 3: ...orrect position install the bottom cover 13 Fix the bottom cover using two screws If the bottom cover collides with the metal bracket you need to break off some strips 14 Slide the screen into the support and secure with two screws 15 Verify the necessary lenght of the neck cover 16 ...
Page 4: ...tion manual CA HM UNI EVO 006 Version 1 0 Final product image Slide the cover onto the screen and fix the screw Install the neck cover onto the screen and fix the screws Put the screw cover over it 17 19 20 18 ...
