Pioneer CA-HM-UNI-EVO.004 Installation Manual Download Page 2

Page: 2 / 4

Installation manual CA-HM-UNI-EVO.004 | Version 2.0

Completed installation of unit

with unit support

Slide the complete mechanism into the metal cage

Mount screen support to the screen using

the two center screws on each side

(included with SPH-EVO82DAB)

Install sliding mecha using the shown hardware

(included with the installation kit)

Lock the unit support into the metal cage by opening the two

metal tabs and tighten the indicated screws (on both sides)

Mount screen cover onto the screen support

using the remaining four screws as indicated

(included with SPH-EVO82DAB)

Summary of Contents for CA-HM-UNI-EVO.004

Page 1: ...are Screen connector cover Screen neck Screen cover Left right support brackets installed Mount side support bracket with the hardware supplied included with the installation kit Mount unit support to the side brackets using the supplied hexagonal bolds included with the installation kit 1 2 4 3 CA HM UNI EVO 004 INSTALLATION KIT FOR SPH EVO82DAB Trim bezel ...

Page 3: ...pening and install the unit cover Completely inserted screen neck Slide the screen neck into the unit cover pay attention to the positioning of the tabs Slide the screen support into the unit support 12 13 15 14 Mount screw covers paying attention to the marked numbers and locations 11 1 2 4 3 ...

Page 4: ...ide the connector cover in the back of the screen and fix the screw included with SPH EVO82DAB 18 19 Choose the desired distance for your screen and tighten the two screws on top included with the installation kit Insert the connector into the screen 17 16 Final product image Install the front cover with the chrome bezel 20 21 ...