HD-MOD BDP-LX70A_95FD
BluRayMods.com ©2008 Page - 2 -
Opening your player
First make sure that your player is
disconnected from the mains
before you even start opening
the player.
If you set the unit in front of you with the display towards you there are 3 screws at the back of
the player. Remove them using a Philips screwdriver.
Remove the two big screws at the left and right side.
Remove the top cover, by gently lifting the back of the cover up, until it comes free.
Disassembly
After removing the top cover, you will see the mainboard, most of the connections are made on
this board.
Remove the BDrom drive by unscrewing the 4 screws, which hold it in place.
Now you have better access to the mainboard.
Remove all the screws that hold the the mainboard in place.
Pull out all the plugs and cables connecting to this board, and take out the board.
