Pioneer BDP-LX70 Operating Instructions Manual Download

Page: 4 / 64

Contents

01 Before you start

Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

What’s in the box

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Putting the batteries in the remote control

. . . . . . . . . . . . . . . . . . 6

Using the remote control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Disc/content format playback compatibility

. . . . . . . . . . . . . . . . . 6

File compatibility

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Titles and chapters

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

DVD-Video regions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

BD-ROM regions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

02 Connecting up

Rear panel

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Easy connections

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using other types of video output

. . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting for HDMI output

. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting using the component video output

. . . . . . . . . . . . . 12

Changing the output video resolution

. . . . . . . . . . . . . . . . . . . . 12

Connecting using an S-Video output

. . . . . . . . . . . . . . . . . . . . . 13

Connecting for surround sound

. . . . . . . . . . . . . . . . . . . . . . . . . 13

Network connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Controlling this player via another Pioneer component

. . . . . . . 14

Using an external IR receiver with this player

. . . . . . . . . . . . . . . 14

03 Controls and displays

Front panel

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Remote control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Front panel display

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

04 Getting Started

Switching on and setting up

. . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using the on-screen displays

. . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Setting up for network use

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Playing movies, music and photos

. . . . . . . . . . . . . . . . . . . . . . . 20

Playing BD/DVD movies and audio CD

. . . . . . . . . . . . . . . . . . . 20

Playback controls

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Frequently Asked Questions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

05 Using the Disc Navigator

Introduction

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Movie Navigator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Photo Navigator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Music Navigator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

06 Using the Home Media Gallery

Introduction

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

About network playback

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Using the Home Media Gallery

. . . . . . . . . . . . . . . . . . . . . . . . . .31

Movie Navigator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Photo Navigator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Music Navigator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

About Windows Media Connect

. . . . . . . . . . . . . . . . . . . . . . . . . 36

07 Video/Audio Adjust menu

Video Adjust

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Audio Adjust

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

08 Initial Setup menu

Using the Initial Setup menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

About the audio output settings

. . . . . . . . . . . . . . . . . . . . . . . . . 42

Speaker Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

09 Additional information

Taking care of your player and discs

. . . . . . . . . . . . . . . . . . . . . .44

Screen sizes and disc formats

. . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Resetting the player

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Setting up the remote to control your TV

. . . . . . . . . . . . . . . . . . . 45

TV Preset code list

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

BD/DVD language code list

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

BD/DVD country/area code list

. . . . . . . . . . . . . . . . . . . . . . . . . . 47

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Glossary

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

License

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Before you start

Movie file playback

Video files encoded in the WMV (Windows Media* Video), MPEG-1/2
formats are playable from DVD-R/-RW, or from a connected media
server.

Music file playback

This player supports various audio formats, including WMA
(Windows Media* Audio), MP3 and WAV. You can play files stored
on DVD-R/-RW, or from a connected media server.

Photo file playback

PNG, GIF and JPEG image files — including the popular EXIF format
used by most digital cameras to store picture shooting information
together with the JPEG image — are playable from DVD-R/-RW, or
from a connected media server.

What’s in the box

Please confirm that the following accessories are in the box along
with these operating instructions when you open it:

• Remote control

• AA/R6P dry cell batteries x2

• Stereo audio cable (red/white plugs)

• Video cable (yellow plugs)

• HDMI cable

• LAN cable

• Power cable

• Warranty card

Putting the batteries in the remote
control

•

Insert two AA/R6P batteries into the battery compartment

following the indications (

) inside the compartment.

Important

Incorrect use of batteries can result in hazards such as leakage and
bursting. Please observe the following:

• Don’t mix new and old batteries together.

• Don’t use different kinds of batteries together — although they

may look similar, different batteries may have different voltages.

• Make sure that the plus and minus ends of each battery match

the indications in the battery compartment.

• Remove batteries from equipment that isn’t going to be used for

a month or more.

• When disposing of used batteries, please comply with

governmental regulations or environmental public instruction’s
rules that apply in your country/area.

Using the remote control

Please keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote and

the remote sensor on the unit.

• The remote has a range of about 7 m (at an angle of 30º from

either side of the sensor). Use within this range in front of the
remote control sensor on the front panel.

• Remote operation may become unreliable if strong sunlight or

fluorescent light is shining on the unit’s remote sensor.

• Remote controllers for different devices can interfere with each

other. Avoid using remotes for other equipment located close to
this unit.

• Replace the batteries when you notice a fall off in the operating

range of the remote.

• When the batteries run down or you change the batteries, the TV

preset codes are automatically reset. See

page 45 to reset them.

Disc/content format playback
compatibility

General disc compatibility

This player is compatible with a range of disc types (media) and
formats. Compatible discs will usually feature one of the following
logos on the disc and/or disc packaging. Note however that some
disc types, such as recordable BD, DVD or CD, may be in an
unplayable format — see below for further compatibility
information.

•

Do not use o  sto e batte ies in di ect sunlight o
othe  excessively hot  lace, such as inside a ca  o
nea  a heate . This can cause batte ies to leak,
ove heat, ex lode o  catch fi e. It can also  educe the
life o   e fo mance of batte ies.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

File extensions

The following file extensions should be used with this player:

•

Video

.wmv .mpg .mpeg

•

Audio

.wma .mp3 .wav

•

Image

.jpg .jpeg .png .gif

Even when files have a supported file extension, some files may not
play or display depending on the content or media server type.

Titles and chapters

BD and DVD movie discs are divided into one or more titles. Titles
may be further subdivided into chapters.

DVD-Video regions

All commercially produced DVD movies (DVD-Video discs) carry a
region mark on the case somewhere that indicates which region(s)
of the world the disc is compatible with. This player also has a region
mark, which you can find on the rear panel. Discs from incompatible
regions will not play in this player. Discs marked

ALL

will play in any

player.

The diagram below shows the various DVD regions of the world.

This player is

REGION 2

BD-ROM regions

Like DVD movies, BD movie discs (BD-ROM) also carry a region
mark that indicates which region(s) of the world the disc is
compatible with. This player also has a region mark, which you can
find on the rear panel. Discs from incompatible regions will not play
in this player. Discs marked

ALL

will play in any player.

The diagram below shows the various BD-ROM regions of the world.

This player is

REGION B

Title 1

Title 2

Title 3

Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2

REGION A

REGION B

REGION C

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Connecting up

Easy connections

This is a basic setup that allows you to watch discs on your TV using
just the cables supplied.

Important

• This player is equipped with copy protection technology. Do not

connect this player to your TV via a VCR using AV cables, as the
picture from this player will not appear properly on your TV. (This
player may also not be compatible with some combination TV/
VCRs for the same reason; refer to the manufacturer for more
information.)

• Do not unplug the player from the power outlet while it is

switched on.

• Do not plug this player into a switched power supply found on

some amplifiers and AV receivers.

Connect the VIDEO OUT and one pair of AUDIO OUT jacks

to a set of audio/video inputs on your TV.

Use the supplied red/white stereo audio and yellow video cables.
Make sure you match up the left and right audio outputs with their
corresponding inputs for correct stereo sound.

See

below if you want to use a

different type of connection.

Connect the supplied AC power cord to the AC IN inlet,

then plug into a power outlet.

Using other types of video output

This player has standard (composite), S-Video and component video
outputs, as well as an HDMI connector (for digital video/audio).

In order to be able to watch HD (high definition) BDs at their full
resolution, you should connect the player to your TV using either the
component video output, or (even better) the HDMI output.

An HDMI connection will additionally give you HD output when
watching DVDs.

If your display has neither of these connection types, an S-Video jack
is also provided, which should give slightly better video quality than
using the standard video output.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Connecting up

Connecting using the component
video output

You can use the component video output instead of the standard
video out jack to connect this player to your TV (or other equipment).

•

Use a component video cable (not supplied) to connect the

COMPONENT VIDEO OUT jacks to a component video input on
your TV, monitor or AV receiver.

Be careful to match up the colours of the three jacks for correct
connection.

Changing the output video resolution

Use the

OUTPUT RESOLUTION

button located on both the front

panel and the remote control to switch the output video resolution
for the HDMI and component video outputs.

The table below shows the output settings.

Note

• Depending on your display, some of the settings may result in

the picture disappearing. In this case, press

OUTPUT

RESOLUTION

repeatedly until the picture re-appears.

• 720/50p, 1080/50i, 1080/50p, 1080/60p and 1080/24p output is

only compatible with HDMI displays. They are not compatible
with the component video output.

• When

is set to

720p

1080i

1080p

video is output in 16:9 format even if

is set to

4:3

(Standard)

. See

on page 39.

• If the contours of the displayed subjects look jagged or blurred,

try setting the Output Video Resolution to 576i/480i. (If you
connected this player to your TV with the HDMI connection and
the picture disappears when you switch the Output Video
Resolution to 576i/480i, use the component connection with the
576i/480i Output Video Resolution or S-Video, the standard
composite connection instead.)

• Note that when using a Component Video connection with a TV

or other AV component (

using HDMI), 480/60i video may be

output in 480/60p, and 576/50i video may be output in 576/50p.

24p output

For smooth presentation of 1080/24p or 720/24p video with an
HDMI-equipped display compatible with 1080/24p input, set

on this player to

(see page 39).

This player will output 1080/24p video over HDMI in the following
cases:

• 1080/24p video: When the Output Video Resolution is set to

Auto

Source Direct

• 720/24p video: When the Output Video Resolution is set to

Auto

Note

• Even when

is set to

, if a TV not compatible with

1080/24p video is connected, the actual frame frequency of the
video output will be 60 Hz.

• The video output will be interrupted when switching the video

output from 1080/24p or 720/24p to other output video
resolutions, or when switching to 1080/24p or 720/24p from
other output video resolutions.

Setting

TV
system

HDMI output

Component
output

Video/S-Video
output

AUTO

PAL
NTSC

576/50i
480/60i

576i or
480i

PAL
NTSC

576/50i
480/60i

576p or
480p

PAL
NTSC

576/50p
480/60p

576/50i
480/60i

720p

PAL
NTSC

720/50p
720/60p

576/50i

720/60p

576/50i
480/60i

1080i

PAL
NTSC

1080/50i
1080/60i

576/50i

1080/60i

576/50i
480/60i

1080p

PAL
NTSC

1080/50p
1080/60p

576/50i
480/60i

Source
Direct

PAL
NTSC

576/50i
480/60i

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Connecting up

Network connection

This player can be connected to a local area network (LAN) via the
Ethernet port on the rear panel.

After making the physical connection the player needs to be set up
for network communication. This is done from the Initial Setup
menu — see

on page 19 for detailed

instructions.

For best performance, we recommend using a 100BASE-TX
compatible PC and Ethernet hub.

Connecting via an Ethernet hub

If you already operate one or more PCs on a local area network, you
can integrate this player by connecting it to the Ethernet hub using
the included LAN cable.

In the example configuration below, this player would be able to
access content from either of the PCs.

Connecting directly to a PC

If you only need to use one PC to act as a media server, you can
connect this player directly to the PC using the included LAN cable.

Controlling this player via another
Pioneer component

The

CONTROL IN

jack allows you to control this player via the

remote control sensor of another Pioneer component — typically an
AV receiver — that has a

CONTROL OUT

jack. Remote control

signals are passed through to the player from the remote sensor of
the other component, allowing you greater freedom in the
placement of your player.

•

Use a miniplug cord (not supplied) to connect the CONTROL

IN jack of this player with the CONTROL OUT jack of your other
Pioneer component.

• You will also need to connect a coaxial digital cable, analog

audio cable, or video cable.

• When connected via System Control, point the remote control

toward the connected component (such as an AV receiver). The
remote will not work correctly when pointed at this unit.

• You cannot connect use System Control with components that

do not have a System Control jack or with components
manufactured by companies other than Pioneer.

Using an external IR receiver with this
player

If you prefer to keep your AV equipment in a closed cabinet, you can
use an external IR receiver connected to the

IR IN

jack. You can thus

have just the receiver outside of the cabinet and still be able to
control the player.

Tip

• You may need to set the

IR RECEIVER

switch (located under the

IR IN

jack) for this player to recognize the IR receiver correctly.

• This player does not supply power to the external IR receiver.

Please see the operating instructions of the IR receiver for the
power requirements.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Controls and displays

Remote control

STANDBY/ON

Press to switch the player on or into standby.

OPEN/CLOSE

Press to open or close the disc tray.

FL DIMMER

Press to change the brightness of the display. When the display and
other indicators are off, the

FL OFF

indicator (see page 15) lights.

Number buttons

Use to enter title, chapter or track numbers, etc.

CLEAR

: Press to clear a numeric entry, etc.

ENTER

: Press to select an option or execute a command.

HOME MEDIA GALLERY

Press to display the Home Media Gallery screen (see page 30).

OUTPUT RESOLUTION

Press to switch the output resolution over HDMI and component
video outputs (see page 12 and page 23).

AUDIO

Press to select the audio channel or language (see page 23).

SUBTITLE

Press to select a subtitle display (see page 23).

DISPLAY

Press to display information (see page 23).

10 ANGLE

Press to change the camera angle during BD-ROM or DVD-Video
movie multi-angle scene playback (see page 23).

11 DISC NAVIGATOR

TOP MENU

Press to display the top menu of a BD-ROM or DVD-Video disc.
When playing a DVD-R/-RW disc, press to display/exit the Disc
Navigator.

12 POPUP MENU/MENU

BD-ROM: Press to display/hide the pop-up menu.
DVD-Video: Press to display the disc menu (if there is one).

and ENTER

Use to navigate on-screen displays and menus. Press

ENTER

select an option or execute a command.

14 HOME MENU

Press to display the player’s Home Menu, from which you can
access most of the player’s functions.

15 RETURN

Press to return to a previous screen.

16 RED/GREEN/YELOW/BLUE

Use to navigate BD-ROM menus.

17 Playback controls

: Press to start reverse/forward scanning.

: Press to start or resume playback.

: Press to pause playback; press again to restart.

: Press to stop playback (you can resume playback by

pressing ).

: Press to jump to the start of the previous/next

chapter/track.

: Use for slow motion and step frame (see

page 22).

18 PLAY MODE

Press to change the Play Mode (repeat play, for example) (see
page 22).

19 PHOTO ZOOM

Press to zoom the screen when displaying a still image (see
page 23).

20 VIDEO ADJUST

Press to display the Video Adjust screen (see page 37).

21 TV CONTROL buttons

See also

on page 7 for more on compatible file

types.

If you haven’t already done so, select ‘Home Media Gallery’

from the Home Menu, then ‘Music’.

You should see a list of all the artist names found on the selected
server.

Use the

buttons to change the current selection

(highlighted in yellow).

Press ENTER to display the Album list.

Select the Album you want to listen to and press ENTER to

display the Song list.

• When the movie length cannot be determined, it is displayed as

“-:--”.

Use the

buttons to change the current selection

(highlighted in yellow).

On the left side of the screen you can see file information, such as
the artist and album name, genre and file format, for the current
selection.

Press ENTER to play the currently highlighted music.

The display shows the

Now Playing

screen.

• Press to start or resume playback from the last track played

on the

Now Playing

screen.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Using the Home Media Gallery

Now playing song information

The Now Playing screen shows detailed information about the song
playing, including:

• Artist and song title

• Progress bar (elapsed time and song length)

• Album name

• Genre

• File format

• Browse menu

• Play status

• Play mode

• Next/Previous song names

Music sources

From the music sources window you can see all the servers found
on the network and change the selected server. See

on page 32 for more information.

About Windows Media Connect

Windows Media Connect is software to deliver music, photos and
movies from a Microsoft Windows XP computer to home stereo
systems and TVs.

With this software, you can play back files stored on the PC through
various devices wherever you like in your home.

At this time you cannot download the Windows Media Connect
software from Microsoft’s website. If your server currently does not
have Windows Media Connect installed, install Windows Media
Player 11 (for Windows XP) instead. This software can be
downloaded from Microsoft’s website.

For more information check the official Microsoft website.

Authorizing this player

In order to be able to browse and play files from a Windows XP PC
with Windows Media Connect this player must be authorized. This
happens automatically when the player makes a connection over
the network to the PC. If not, please authorize this player manually
on the PC.

For more information on authorizing this player, refer to the
instruction manual of your server.

FAQ

– File names that don’t end with one of the permitted extensions
won’t be recognized by this player. See also

page 7.

– Supported file formats vary by server. As such, files not
supported by your server are not displayed on this unit.

For more information check with the manufacturer of your
server.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Video/Audio Adjust menu

Audio Adjust

From the Audio Adjust menu you can set the Audio DRC (Dynamic
Range control).

Audio DRC

• Default setting:

Off

When watching Dolby Digital BD and DVD discs, as well as PC files
with Dolby Digital audio, at low volume, it’s easy to lose the quieter
sounds completely — including some of the dialog. Switching
Audio DRC to On can help by bringing up the quieter sounds, while
controlling loud peaks.

How much of a difference you hear depends on the material you’re
listening to. If the material doesn’t have wide variations in volume,
you may not notice much change.

Important

• Audio DRC is effective with the following types of audio:

– Analog audio from the

AUDIO OUT (2ch)

and

AUDIO OUT

(5.1ch)

jacks.

– PCM audio from the

DIGITAL AUDIO OUT

and

HDMI OUT

jacks (see also

on page 42).

Press HOME MENU and select ‘Video/Audio Adjust’ from

the on-screen display.

Select ‘Audio Adjust’.

Highlight Audio DRC, then use the

buttons to change

to ‘Off’, ‘Level 1’, ‘Level 2’ or ‘Max’ as required.

Press ENTER or RETURN to make the setting and exit the

Audio Adjust screen.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Initial Setup menu

Audio Out

Dolby Digital Out

Dolby Digital •

Outputs a Dolby Digital signal when a Dolby Digital source is being played.

Dolby Digital

PCM

Converts Dolby Digital sources to Linear PCM output. Use if your connected equipment doesn’t
support Dolby Digital audio.

DTS Out

DTS •

Outputs a DTS signal when a DTS source is being played.

DTS

PCM

Converts sources with DTS audio to Linear PCM output. Use if your connected equipment doesn’t
support DTS audio.

DTS Downmix

Stereo •

If you’ve selected

DTS

PCM

above, you can choose the way the DTS signal is down-

mixed PCM audio.

Stereo

downmixes the signal to 2-channel stereo.

Lt/Rt

Downmixes to a 2-channel signal compatible with Dolby surround matrix decoders. (This allows you
to hear surround sound if your AV receiver or amplifier has Dolby Pro Logic capability.)

HDMI Audio Out

Auto •

Dolby Digital and DTS sources are output as a bitstream signal. However, depending on the HDMI
device connected and the content being played, Linear PCM audio may be output.

PCM

All audio signals are converted to Linear PCM.

Language

OSD Language

English •

Sets the language of the on-screen displays to English.

Choose from the languages displayed for the on-screen displays.

Audio Language

English •

Sets both the BD-ROM and DVD-Video default audio language to English.

Choose from the languages displayed to set the default audio language for BD-ROM and DVD-Video
playback.

Other

Continue to the next screen to set the default audio language for BD-ROM and DVD-Video disc
playback. You can select the language name or enter the code number (see on page 47 for the code
list).

Subtitle Language

English •

Sets the default subtitle language for BD-ROM and DVD-Video playback to English.

Choose from the languages displayed to set the default subtitle language for BD-ROM and
DVD-Video playback.

Other

Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video disc
playback. You can select the language name or enter the code number (see on page 47 for the code
list).

BD/DVD Menu
Language

w/Subtitle Language

•

Sets the language of BD-ROM and DVD-Video menus to the same as that set for the subtitle
language.

Choose from the displayed languages to set the default language for BD-ROM and DVD-Video
menus.

Other

Continue to the next screen to set the default menu language for BD-ROM and DVD-Video disc
menus. You can select the language name or enter the code number (see on page 47 for the code
list).

Subtitle Display

On •

Select to have BD-ROM and DVD-Video discs display subtitles.

Off

Select to switch off subtitle display.

Parental Lock

Change Password
(Set Password)

Next Screen

Set or change the password necessary to play BD or DVD discs that have level/age restrictions. In
order to change the password, you’ll need to first enter your existing one.

DVD Parental Lock

Change Level

Enter your password and then set the parental lock level. Discs with a lock level higher than that set
in the player will require the password to play.

DVD Country Code

Enter your password and then set a country/area code. This ensures that you see the scenes
intended for your country or area. See

on page 47.

BD Parental Lock

Change Age
Restriction

Enter your password and then set the age restriction.
“255” indicates no parental control.

Setting

Options

Explanation

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Initial Setup menu

About the audio output settings

The table below shows how the audio settings you make in the Initial Setup menu (page 39) affect the output to the analog (2ch/5.1ch), digital
and HDMI outputs with various types of disc/files.

*10

*11

*12

*13

*14

*15

Note

• Output sampling rate is 48 kHz through the digital audio outputs.

• MPEG audio is always output as linear PCM.

Disc audio format

Analog outputs

Digital outputs

HDMI output

2ch

5.1ch

PCM convert

Bitstream

PCM

Auto

BD-ROM

Dolby Digital

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

Dolby Digital plus

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

Dolby TrueHD

*14

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

DTS

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

DTS-HD

*15

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

DTS

*7, 11

5.1ch PCM

DTS

*7, 8, 11

Linear PCM 7.1ch

2ch downmix PCM

5.1ch downmix PCM

2ch downmix PCM

7.1ch PCM

*9, 12,13

7.1ch PCM

*9, 12,13

Linear PCM 5.1ch

2ch downmix PCM

5.1ch PCM

*10

2ch downmix PCM

5.1ch PCM

*9, 10,12

5.1ch PCM

*9, 10,12

Linear PCM 2ch

2ch PCM

*12

2ch PCM

*12

DVD-Video

Dolby Digital

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

Dolby Digital

5.1ch PCM

Dolby Digital

DTS

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

DTS

5.1ch PCM

DTS

MPEG

2ch PCM

Linear PCM

2ch PCM

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

Chapter 9

Additional information

Taking care of your player and discs

Handling discs

When holding discs of any type, take care not to leave fingerprints,
dirt or scratches on the disc surface. Hold the disc by its edge or by
the center hole and edge.

Damaged or dirty discs can affect playback performance. Take care
also not to scratch the label side of the disc. Although not as fragile
as the recorded side, scratches can still result in a disc becoming
unusable.

Should a disc become marked with fingerprints, dust, etc., clean
using a soft, dry cloth, wiping the disc lightly from the center to the
outside edge as shown in the diagram below.

If necessary, use a cloth soaked in alcohol, or a commercially
available DVD/BD cleaning kit to clean a disc more thoroughly.
Never use benzine, thinner or other cleaning agents, including
products designed for cleaning vinyl records.

Storing discs

Although BD and DVD discs are more durable than vinyl records,
you should still take care to handle and store discs correctly. When
you’re not using a disc, return it to its case and store upright. Avoid
leaving discs in excessively cold, humid, or hot environments
(including under direct sunlight).

Don’t glue paper or put stickers onto the disc, or use a pencil, ball-
point pen or other sharp-tipped writing instrument. These could all
damage the disc.

For more detailed care information see the instructions that come
with discs.

Do not load more than one disc into the player at a time.

Damaged and odd-shaped discs

Discs spin at high speed inside the player. If you can see that a disc
is cracked, chipped, warped, or otherwise damaged, don’t risk using
it in your player — you could end up damaging it.

This player is designed for use with conventional, fully circular discs
only. Use of shaped discs is not recommended for this product.
Pioneer disclaims all liability arising in connection with the use of
shaped discs.

Do not use any kind of adapter when playing 8 cm DVD discs. This
size disc can be played in this player without an adapter; just use the
smaller disc guide in the disc tray.

Cleaning the pickup lens

The player’s lens should not become dirty in normal use, but if for
some reason it should malfunction due to dust or dirt, consult your
nearest Pioneer-authorized service center. Although lens cleaners
for DVD players are commercially available, we advise against using
them since some may damage the lens.

Problems with condensation

Condensation may form inside the player if it is brought into a warm
room from outside, or if the temperature of the room rises quickly.
Although the condensation won’t damage the player, it may
temporarily impair its performance. For this reason you should leave
it to adjust to the warmer temperature for about an hour before
switching on and using.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

TV Preset code list

Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for
the manufacturer in the list will not work for the model that you are using.

Manufacturer

Code(s)

Manufacturer

Code(s)

ACURA

ADMIRAL

AIWA

AKAI

32, 35, 42

AKURA

ALBA

07, 39, 41, 44

AMSTRAD

42, 44, 47

ANITECH

ASA

ASUKA

AUDIOGONIC

07, 36

BASIC

LINE

41, 44

BAUR

31, 07, 42

BEKO

BEON

BLAUPUNKT

BLUE

SKY

BLUE

STAR

BPL

BRANDT

BTC

BUSH

07, 41, 42, 44, 47, 56

CASCADE

CATHAY

CENTURION

CGB

CIMLINE

CLARIVOX

CLATRONIC

CONDOR

CONTEC

CROSLEY

CROWN

38, 44

CRYSTAL

CYBERTRON

DAEWOO

07, 44, 56

DAINICHI

DANSAI

DAYTON

DECCA

07, 48

DIXI

07, 44

DUMONT

ELIN

ELITE

ELTA

EMERSON

ERRES

FERGUSON

07, 36, 51

FINLANDIA

35, 43, 54

FINLUX

32, 07, 45, 48, 53, 54

FIRSTLINE

40, 44

FISHER

32, 35, 38, 45

FORMENTI

32, 07, 42

FRONTECH

31, 42, 46

FRONTECH

PROTECH

FUJITSU

FUNAI

40, 46, 58

GBC

32, 42

00, 01, 08, 07, 10, 11, 17, 02, 28, 18

GEC

07, 34, 48

GELOSO

32, 44

GENERAL

GENEXXA

31, 41

GOLDSTAR

10, 23, 21, 02, 07, 50

GOODMANS

07, 39, 47, 48, 56

GORENJE

GPM

GRAETZ

31, 42

GRANADA

07, 35, 42, 43, 48

GRADIENTE

30, 57

GRANDIN

GRUNDIG

31, 53

HANSEATIC

07, 42

HCM

18, 44

HINARI

07, 41, 44

HISAWA

HITACHI

31, 33, 34, 36, 42, 43, 54, 06, 10, 24,

25, 18

HUANYU

HYPSON

07, 18, 46

ICE

46, 47

IMPERIAL

38, 42

INDIANA

INGELEN

INTERFUNK

31, 32, 07, 42

INTERVISION

46, 49

ISUKAI

ITC

ITT

31, 32, 42

JEC

JVC

13, 23

KAISUI

18, 41, 44

KAPSCH

KENDO

KENNEDY

32, 42

KORPEL

KOYODA

LEYCO

07, 40, 46, 48

LIESENK

TTER

LOEWE

LUXOR

32, 42, 43

ELECTRONIC

31, 44, 45, 54, 56, 07, 36, 51

MAGNADYNE

32, 49

MAGNAFON

MARK

MATSUI

07, 39, 40, 42, 44, 47, 48

NORDMENDE

32, 36, 51, 52

OCEANIC

31, 32, 42

ORION

32, 07, 39, 40

OSAKI

41, 46, 48

OSO

OSUME

OTTO

VERSAND

31, 32, 07, 42

PALLADIUM

PANAMA

PANASONIC

31, 07, 08, 42, 22

PATHO

CINEMA

PAUSA

PHILCO

32, 42

PHILIPS

31, 07, 34, 56, 68

PHOENIX

PHONOLA

PROFEX

42, 44

PROTECH

07, 42, 44, 46, 49

QUELLE

31, 32, 07, 42, 45, 53

LINE

RADIOLA

RADIOSHACK

10, 23, 21, 02

RBM

RCA

01, 10, 15, 16, 17, 18, 61, 62, 09

REDIFFUSION

32, 42

REX

31, 46

ROADSTAR

41, 44, 46

SABA

31, 36, 42, 51

SAISHO

39, 44, 46

07, 38, 44, 46, 69, 70

SANYO

35, 45, 48, 21, 14, 91

SBR

07, 34

SONTEC

SONY

SOUNDWAVE

STANDARD

41, 44

STERN

SUSUMU

SYSLINE

TANDY

31, 41, 48

TASHIKO

TATUNG

07, 48

TEC

TELEAVIA

TELEFUNKEN

36, 37, 52

TELETECH

TENSAI

40, 41

THOMSON

36, 51, 52, 63

THORN

31, 07, 42, 45, 48

TOMASHI

TOSHIBA

05, 02, 26, 21, 53

TOWADA

ULTRAVOX

32, 42, 49

UNIDEN

UNIVERSUM

31, 07, 38, 42, 45, 46, 54

VESTEL

VICTOR

VOXSON

WALTHAM

WATSON

WATT

RADIO

32, 42, 49

WHITE

WESTINGHOUSE

YOKO

07, 42, 46

ZENITH

03, 20

PIONEER

00, 31, 32, 07, 36, 42, 51

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

Troubleshooting

Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this componen t, please check
the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliance s being
used. If the trouble cannot be rectified even after checking the points below, ask your nearest Pioneer authorized service cent er or your
dealer to carry out repair work.

Playback

Problem

Remedy

The disc won’t play or is automatically
ejected after loading.

• Make sure the disc is free from dirt and dust and is not damaged (see

on page 44).

• Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray gui de.
• Incompatible region: If the region on a BD-ROM or DVD-Video disc does not match the region on the

player, the disc cannot be used (see

and

on page 8).

• Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player

near an air-conditioning unit.

• Make sure the disc is compatible with this player (see

page 6).

Picture freezes and the front panel and
remote control buttons stop working.

• Press

(stop), then start playback again ( (play)).

• Press the front panel

STANDBY/ON

button to switch the power off, then switch back on and

restart playback. If the power fails to switch off, press and hold

STANDBY/ON

for 20 seconds until

the power switches off. Then switch on again by pressing

STANDBY/ON

• Unplug from the wall socket, then plug back in and switch on again by pressing

STANDBY/ON

switch the player on.

No picture/No colour.

• Incorrect video connections: Check that connections are correct and that plugs are inserted fully.

Also check the video cable for damage.

• TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected

equipment.

• Depending on your display, some of the settings may result in the picture disappearing. In this case,

press

OUTPUT RESOLUTION

repeatedly until the picture re-appears (see

on page 12).

• Some BD-ROM discs output video only over HDMI.

The video output is set to 720p/1080i/
1080p, but the actual output is 576i/480i or
576p/480p.

• For copy-protection purposes, DVD-Video and some BD-ROM discs output 576i/480i or 576p/480p

over the component output.

Screen is stretched or aspect does not
change.

• The

setting in the Initial Settings menu is incorrect. See

and

on page 39 for how to set these correctly for your TV/monitor.

• When

is set to

720p

1080i

1080p

, video is output in 16:9 Widescreen

format even if

is set to

4:3 (Standard)

Picture disturbance during playback or
dark image.

• This player is compatible with Macrovision System copy guard. Some discs include a copy prevention

signal, and when this type of disc is played back, stripes etc., may appear on some sections of the
picture depending on the TV. This is not a malfunction.

• Due to the player’s copy protection circuits, connection of this device through a VCR or an AV

selector may cause picture problems. This is not a malfunction.

No audio, or audio is distorted.

• No audio is output during slow motion playback or when scanning contents.
• Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).
• Check that the disc is free from dust and dirt, and that it is not damaged (

on page 44).

• Check that all interconnects are firmly inserted.
• Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the

cable for damage.

• Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.
• Check the

on page 41. If this is set to

, output from the

AUDIO OUT

(2ch)

jacks will be incorrect.

• Check the

on page 43.

• For copy-protection purposes, some BD-ROM discs only output audio over optical/coaxial and HDMI.
• When Audio CDs containing text files or such data are played back, sound is muted.

The analog audio is OK, but there appears
to be no optical/coaxial digital audio
signal.

• Check that the

and

settings (see

on page 40) are suitable for

your amplifier/receiver — check the instruction manual that came with your amplifier/receiver (also
check that the output settings on your amplifier/receiver are correct).

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

Network troubleshooting

No HDMI audio output.

• If you have connected to an HDCP-compatible DVI component, there won’t be any audio output from

the HDMI terminal. Connect using the optical/coaxial digital outputs (or the analog outputs).

• This player does not output multi-channel 192 kHz audio. Press

AUDIO

during playback to switch

between the available audio streams.

HDMI Control does not function.

•Verify that the HDMI cable is firmly connected.
•Make sure that this unit’s

is set to

(see

on page 41).

•Make sure that the HDMI Control for the connected components is set to On. For more information,

refer to the operating manual for the connected component.

•This function may not work properly if you have multiple components connected to a single plasma

television, AV system (amplifier or AV receiver etc.), or HD AV Converter. For more information refer
to the operating manual of your plasma television, AV system, or HD AV Conve rter.

•

You can enable HDMI Control by turning the

setting to

for all components

connected via HDMI cable. Check the video output from this unit once you have completed
making connections and settings for all components. You will need to check the video output
each time you change connected components or remove the HDMI cable.

•Check whether the connected component supports HDMI Control or not. For more informati on refer

to the operating manual of your plasma television, AV system (amplifier or AV receiver etc.), or HD AV
Converter.

•Certain functions are not supported on some plasma televisions.
•This player does not support HDMI Control-compatible components other than those made by

Pioneer.

•This unit will not function properly with components that do not support HDMI Control, or when

connected with components other than those made by Pioneer.

Problem

Remedy

Problem

Remedy

Home Media Gallery is not available.

• LAN indicator is unlit:
– Check the physical connections (hub, 100BASE-TX/10BASE-T or crossed cable and other cable
quality when cabled directly to a PC).
– If the player is connected to a network via a hub, make sure that the Ethernet (CAT-5 LAN) cable
you’re using is a ‘standard’ or ‘straight through’ type.
– If the player is connected directly to a PC, make sure that the Ethernet (CAT-5 LAN) cable you’re
using is a ‘crossed’ or ‘crossover’ type.
• LAN indicator is lit:
– If this player’s IP address is set automatically, make sure that the media server’s address is also set
automatically. If the IP address of the media server has been set manually, set the IP address of the
player manually too (see

settings page 41).

– Check the logical connections (IP address setup, DHCP, etc.). Confirm that the IP address is correct
if acquired using DHCP or Auto-IP in the Network Config. screen that follows the Initial Setup menu
(see

settings page 41).

– Confirm that the media server is on and not in standby or sleep mode.
– Check the network and other settings on the media server.
– Check that this player and the media server are on the same Local Area Network (LAN).
– Check if the media server (Windows Media Connect or DLNA-compliant) is running. Restart if
necessary.
– Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if
one or more folders has become corrupted on the server.
– Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.

A connected media server does not show
up in the source list in the Home Media
Gallery.

• Confirm that the media server is on and not in standby or sleep mode.
• Check the network and other settings on the media server.
• Check that this player and the media server are on the same Local Area Network (LAN).
• Check if the media server (Windows Media Connect or DLNA-compliant) is running. Restart if

necessary.

• Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if

one or more folders has become corrupted on the server.

• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.
• Check that there are playable files on the media server.
• After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.

A media server shows up in the source list
but is not available (a lock icon

( )

appears).

• Check the media server setup. If a client is registered (authorized) manually, the setup procedure

may have to be run again.

• Check that there are playable files on the media server.
• After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

When the

set to

DVD

and you insert a hybrid disc

with BD and CD layers, the BD layer is
played back.

• When the layer set to playback at S

is not present on an inserted hybrid

disc, the BD layer is played back.

The

setting

cannot be changed (it is grayed out).

• You cannot change the

when a disc is inserted. Eject the disc to make

changes.

A ‘ ’ appears in the file name.

• A character that cannot be displayed on this unit is included in the file name. Use only alphanumeric

characters if you want file names to be displayed correctly on this player.

The power automatically turns on.

• This unit’s power may be turned on when you control this unit from a connected plasma television. If

you do not want this unit to be turned on in this way, set this unit’s

Off

(see

on page 41).

Problem

Remedy

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

License

[MPEG4IP]

This software is based in part on Mozilla Public License 1.1 see http://www.mozilla.org/MPL/ for information.

[OpenSSL]

OpenSSL License

Copyright © 1998-2004 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed

by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”.

4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written

permission. For written permission, please contact [email protected].

5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without p rior written permission of the

OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for

use in the OpenSSL Toolkit (http://www.openssl.org/)”.

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLA IMED. IN NO EVENT SHALL THE OpenSSL
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DA TA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson
([email protected]).

Original SSLeay License

Copyright © 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found
in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should
be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online
or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic

software written by Eric Young ([email protected])”
The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related:-).

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This

product includes software written by Tim Hudson ([email protected])”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and
put under another distribution licence [including the GNU Public Licence.]

[tiff]

Copyright © 1988-1997 Sam Leffler
Copyright © 1991-1997 Silicon Graphics, Inc.
THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

[FreeType]

The FreeType Project is Copyright © 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.
THE FREETYPE PROJECT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WI LL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PR OJECT.

[GIFLIB]

The GIFLIB distribution is Copyright © 1997 Eric S. Raymond
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

[libhttp]

Copyright © 2000-2004 Dag-Erling Smørgrav
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer in this position and unchanged.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The following copyright applies to the base64 code:
Copyright 1997 Massachusetts Institute of Technology
Permission to use, copy, modify, and distribute this software and its documentation for any purpose an d without fee is hereby granted, provided that both the
above copyright notice and this permission notice appear in all copies, that both the above copyright notice and this permission notice appear in all supporting
documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior
permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.
THIS SOFTWARE IS PROVIDED BY M.I.T. “AS IS”. M.I.T. DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

[Vera.ttf/VeraMono.ttf]

Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera SansBitstreamVeraSans-RomanRelease 1.10 Copyright © 2003 by Bitstream, Inc. All
Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.

[TinyLogin]

[Shadow Utilities]

[Luxi fonts]

Luxi fonts Copyright © 2001 by Bigelow & Holmes Inc. Luxi font instruction code Copyright © 2001 by URW++ GmbH. All Rights Reserved. Luxi is a regis-tered
trademark of Bigelow & Holmes Inc.
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR
OTHER RIGHT. IN NO EVENT SHALL BIGELOW & HOLMES INC. OR URW++GMBH. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
INCLUDING ANY GEN-ERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFT-WARE.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

c) Accompany it with the information you received as to the offer to distribute correspond ing source code. (This alternative is allowed only for

noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b
above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means
all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation
of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source
code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object
code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify,

sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program

or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work
based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy,

distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights
granted herein.
You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed

on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a
consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all
those who receive copies directly or indirectly through you, then the only way you could satisfy both it an d this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstan ce, the balance of the section is intended to apply and the
section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section
has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have
made generous contributions to the wide range of software distributed through that system in rel iance on consistent application of that system; it is up to
the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of th e rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder

who places the Program under this License may add an explicit geographical distribution limitati on excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar

in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of th is License which applies to it and “any later version”,
you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the
Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.

For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.

NO WARRANTY

11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE

LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY

MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library”
and a “work that uses the library”. The former contains code derived from the library, whe reas the latter must be combined with the library in order to run.

GNU LESSER GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which co ntains a notice placed by the copyright holder or other authorized party

saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of
those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either
the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications
and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code
for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using
the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use
of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to
the absence of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a wo rk based on the Library, and copy and distribute such modifications

or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an

argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such
function or table, the facility still operates, and performs whatever part of its purpo se remains meaningful. (For example, a function in a library to compute
square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied
function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably
considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must
be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who
wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to wor k written entirely by you; rather, the intent is to exercise the right to
control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter

all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and
derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and

2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the
same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object
code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a

“work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the
Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such
executables.
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the
Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself
a library. The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less
in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus
portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing
that work also fall under Section 6, whether or not they are linked directly with the Library itself.

6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions

of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and
reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You
must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among
them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work

(which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable
“work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to
recompile the application to use the modified definitions.)

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public , we recommend making it free software that everyone can redistribute
and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion
of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software
Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRAN TY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin
Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if an y, to sign a “copyright disclaimer” for the library, if necessary. Here is a
sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a libra ry for tweaking knobs) written by James Random Hacker.