5
English
FEATURE IDENTIFICATION
FRONT PANEL
BYPASS LIGHT
Lights when the optional RF Bypass Adapter
module is switched to bypass mode. When in
bypass mode, the Adapter sends cable signals
directly to the TV.
CHANNEL AND VOLUME CONTROL/
CURSOR MOVEMENT KEYS
These keys have different functions, depending
on what is displayed on the TV screen. During
normal TV viewing, the
5
/
∞
(up/down) arrows
change the channel by stepping up or down one
channel at a time. The
2
/
3
(left/right) arrows
adjust the sound level up or down.
When a menu is displayed, these same keys
move the cursor up or down, left or right.
CHANNEL NUMBER/TIME DISPLAY
Shows channel number or current time. Also
shows “rEC” when recording is taking place.
CLEAR/MULTI-PURPOSE KEY
When a menu is displayed, returns you to normal
TV viewing. May also have special functions as
described in the on-screen display.
MESSAGE LIGHT
Blinks when the BD-V3500HD receives a
message for you from the cable company, or an
E-mail message from another person.
POWER BUTTON
Turns on the BD-V3500HD and lights the Power-
On Indicator Light when pressed, or turns all off
when pressed again.
POWER ON INDICATOR LIGHT
Lights to show the BD-V3500HD is turned on.
REMOTE SENSOR WINDOW
Receives signals from the remote control.
IMPORTANT:
Do not block this window.
SELECT KEY
Selects the desired action highlighted on the
screen.
SMARTCARD SLOT
Accepts a special card provided by your cable
company. This card is not always needed for
BD-V3500HD operation, unless required by the
cable company.
REAR PANEL
AC POWER INLET
Connects to an unswitched 120-volt AC outlet,
using the detachable power cord (included).
BASEBAND AUDIO INPUT CONNECTORS
Connects to the stereo (L and R) audio outputs
of a DVD or LaserDisc player. When the BD-
V3500HD is off, this audio goes to the Baseband
Audio Output Connectors.
BASEBAND AUDIO OUTPUT CONNECTORS
Connects to the stereo (L and R) audio inputs of a
VCR, audio amplifier, or TV. Requires audio cables
with male phono (RCA) plugs (not included).
BASEBAND AUDIO OUTPUT CONNECTORS
(Used with the Y-Pb-Pr or the digital video out
connector)
Connects to the stereo (L and R) audio inputs of
the TV. Requires audio cables with male phono
(RCA) plugs (not included).
BASEBAND S-VIDEO OUTPUT CONNECTOR
Connects to the S-video input of a TV or VCR.
Requires special S-video cable (not included). If
your analog TV or VCR doesn’t have a similar S-
video jack, use the standard baseband video
connection instead.
BASEBAND VIDEO INPUT CONNECTOR
Connects to the video output terminal on a DVD or
LaserDisk player. When the BD-V3500HD is off,
this video goes to the Baseband Video Output
Connector.
BASEBAND VIDEO OUTPUT CONNECTOR
Connects to the standard baseband video input
of a VCR or TV. Requires video cables with male
phono (RCA) plugs (not included).
CABLE IN INPUT CONNECTOR
Connects to the incoming cable service.
Requires 75-ohm coaxial cable with male “F”-
type connectors (not included).
COMPONENT VIDEO OUTPUT JACKS
Connect to the component video inputs (Y, Pb,
and Pr) on the TV.
DIGITAL AUDIO OUTPUT CONNECTOR
Connects to the digital audio input on your
stereo amplifier, receiver or digital audio
decoder.
DIGITAL VIDEO OUTPUT CONNECTOR
Connects to the DVI connector on the TV.
Requires a DVI-Digital cable (not included).
Do not use a cable with a DVI-I (digital/analog)
plug. To avoid damage, do not force the plug if
it does not fit. Do not use this connector if you
are using the Y-Pb-Pr Component Video Outputs.
The DVI Digital Video output connector complies
with the EIA/CEA-861 standard. It is intended to
be connected to an EIA/CEA-861-compliant HDTV
monitor only, and not to a computer monitor.
The DVI output is compliant with HDCP (High-
bandwidth Digital Content Protection). When
the DVI is connected to a non-HDCP compliant
monitor, BD-V3500HD outputs fixed 480p
resolution. If the monitor does not support 480p
resolution, use the other outputs (component
video, S-video or composite).
SERIAL PORT CONNECTOR
Connects to a Pioneer-approved serial control
device. Refer to the device manual.
USB CONNECTOR
Connects to USB (Universal Serial Bus)-
equipped options such as a wireless keyboard
infrared receiver.
IR CONTROL JACK
Connects to the IR CONTROL CABLE (optional)
or other Pioneer-approved infrared control
device.To prevent malfunction, do not connect
a cable other than the dedicated IR CONTROL
CABLE. Refer to the device manual.
BRE1019C_En_02_10.pm6
03.1.7, 1:05 PM
5
