(
VIDEO 2/BACK CAMERA INPUT
jack) when
a rear view camera is installed on your vehicle.
When the gear shift is in
REVERSE (R)
posi-
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)
!
Confirm the setting immediately whether
the display changes to a rear view camera
video when the gear shift is moved to
RE-
VERSE (R)
from another position.
!
When the display changes to a rear view
camera video during normal drivings,
switch to another setting.
!
To return to the source display, press
V.ADJ
.
1 Use
a
,
b
,
c
,
d
and A.MENU to select
AV INPUT2.
2 Press
c
or
d
to select B. CAMERA.
3 Press
b
to select POLARITY.
4 Press
c
or
d
to select an appropriate
setting for polarity.
Each press of
c
or
d
switches between the
following polarity:
!
BATTERY
When the polarity of the con-
nected lead is positive while the gear shift
is in
REVERSE (R)
position
!
GND
When the polarity of the connected
lead is negative while the gear shift is in
RE-
VERSE (R)
position
Switching the warning tone
If the front panel is not detached from this
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn
off the warning tone.
1 Use
a
,
b
,
c
,
d
and A.MENU to select
DT. WARNING.
2 Press
a
to turn warning tone on.
#
To turn warning tone off, press
b
.
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in
P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
1 Use
a
,
b
,
c
,
d
and A.MENU to select
FLAP SET.
2 Press
a
and the LCD panel slides to the
back.
#
Press
b
and the LCD panel slides to the front.
3 Press
c
or
d
to select the display to
open/close automatically or manually.
Press
c
to select
MANUAL
, and you have to
press
OPEN/CLOSE
to open/close the display.
Press
d
to select
AUTO
, and the display auto-
matically opens/closes when power to this
unit is turned on.
Setting the clock
Use these instructions to set the clock.
1 Use
a
,
b
,
c
,
d
and A.MENU to select
CLOCK ADJ.
2 Press
c
or
d
to select OFF and then
press A.MENU to turn the clock display on.
ON
will appear in the display instead of
OFF
.
Clock display is now on.
Other Functions
En
13
English
Section
05
