Pioneer AVX-505 Service Manual Download Page 52

Page: 52 / 72

AVX-505

Removing the Case Unit

1. Remove screw G to remove the Shaft.

2. Remove screw H to remove the Case Unit.

Removing the Position Motor

1. Remove the two connectors.

2. Remove the two screws J to remove the Position

Motor.

Removing the Angle Motor

1. Remove the connector.

2. Remove the two screws K to remove the Angle

Motor.

Removing the Gear Unit

1. Remove the two screws L to remove the Guide.

2. Remove the Gear Unit.

Removing the Lift Sense PCB

1. Remove the connector.

2. Remove screw M to remove the Lift Sense PCB.

Removing the Angle Sense PCB

1. Remove the connector.

2. Remove screw N to remove the Angle Sense PCB.

Removing the Encoder PCB

1. Upright the tabs in two places indicated with arrows.

2. Remove screw O to remove the Encoder PCB.

Shaft

Spring

Case Unit

Angle Motor

Encoder PCB

Position
Motor

Angle Sense PCB

Guide

Gear Unit

Encoder PCB

Lift Sense PCB

Removing the Sub Grille

1. Remove the two screws to remove the Sub Grille.

Sub Grille

Summary of Contents for AVX-505









































































Search results

Summary of Contents for AVX-505

Reviews:

Related manuals for AVX-505

Brands by name

Popular brands

Pioneer AVX-505, Service Manual

Search results

Summary of Contents for AVX-505

Reviews:

Related manuals for AVX-505

Brands by name

Popular brands