Pioneer AVIC Z120BT, Operation Manual

Page: 141 / 228

=
For details, refer to Memorizing the song
on the next page.
5
Recalls channels from the preset
Tap to recall the preset channel.
=
For details, refer to Storing and recalling
broadcast stations on this page.
6
Switches the SIRIUS display
Each touch of [ Disp ] changes the display in-
formation.
Channel number
—
Channel name
—
Chan-
nel category
—
Artist name/feature
—
Song/
program title
—
Composer
7
Recalls equalizer curves
=
For details, refer to Using the equalizer
on page 172.
8
Displays the
“
Function
”
menu
=
For details, refer to Using the
“
Function
”
menu on page 143.
9
Switches the SIRIUS channel select
mode
You can switch the mode between the two
methods for selecting and listing the channel.
All CH Mode :
You can select a channel from all channels
when you operate this function.
Category Mode :
You can select a channel within a selected ca-
tegory that you operate this function.
a
Switches between the AV operation
screen and the preset list display
You can switch the screen display according
to your preference.
=
For details of the operation, refer to
Switching between the AV operation
screen and the list screen
on page 77.
b
Selects a SIRIUS band
Tapping the key repeatedly switches between
the following SIRIUS bands:
SIRIUS1
,
SIRIUS2 , or SIRIUS3 .
p
This function is convenient for preparing
different preset lists for each band.
c
Switches the channel category
Touch [
c
] or [
d
] to select the desired cate-
gory.
Selecting a SIRIUS channel directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1 Touch [Direct].
2 Touch [0] to [9] to input the desired
channel number.
To cancel the input numbers one by one,
touch
. Touching and holding allows you
to delete all input numbers.
3 While the input number is displayed,
touch [Enter].
The SIRIUS channel that was entered se-
lected.
4 Touch .
You return to the previous display.
Display the Radio ID
If you select CH: 000, the Radio ID is dis-
played.
1 Touch [Direct].
2 Input [000] and then touch [Enter].
If you select another channel, display of the
Radio ID is canceled.
3 Touch .
You return to the previous display.
4 Wait until the Radio ID is displayed.
Storing and recalling broadcast
stations
With a tap of any of the preset tuning keys
(
“
Preset 1
”
to
“
Preset 6
”
), you can easily store
up to six broadcast stations for later recall
(also with the tap of a key).
1 Select the channel that you want to
store in memory.
En
141
Chapter
28
Using
the
SIRIUS
tuner
Using the SIRIUS tuner