- 20 -
En
gl
ish
•
When the route is set:
Distance to final destination, time needed to reach the final destination and estimated
arrival time are shown.
•
When the route is not set:
Direction or altitude is shown.
NOTES
•
Touching and holding the field allows you to display the setting screen for the field. For details, refer
to page 53.
•
The estimated time of arrival is an ideal value calculated based on the speed limit value set in [Max.
Speed] of vehicle type setting and the actual driving speed. The estimated time of arrival is only a
reference value, and does not guarantee arrival at that time. For details, refer to page 46.
Search for a destination or waypoint using the address or another method.
You can also set a destination by touching the map on the screen.
Once the destination is set, the system can start the navigation by touching [Start
Navigation] (page 28).
CAUTION
For safety reasons, these route-setting functions are not available while your vehicle is in motion. To
enable these functions, you must stop in a safe place and put on the handbrake.
Searching for a destination
