Pioneer AVIC-Z1000DAB, Installation Manual

Page: 5 / 72

5
En
En
gl
is
h
Important
The speaker leads are not used when this connection is in use.
Subwoofer output ( SUBWOOFER OUTPUT ) 23 cm (STD)
Low range output (NW)
RCA cable (sold separately)
Power amp
Front output (
FRONT OUTPUT ) 15 cm (STD)
High range output (NW)
Rear output ( REAR OUTPUT ) 15 cm (STD)
Power amp (sold separately)
Middle range output (NW)
Yellow/black (MUTE)
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that equipment. If not, keep the Audio Mute lead free of any connections.
This product
System remote control
Connect to Blue/white cable (max. 300 mA 12 V DC).
Rear speaker (STD)
Middle range speaker (NW)
Front speaker (STD)
High range speaker (NW)
Subwoofer (STD)
Low range speaker (NW)
NOTES
• Select the appropriate speaker mode between standard mode (STD) and network mode
(NW). For details, refer to the Operation Manual.
• Audio source will be set to mute or attenuate, while the following sounds will not be
muted or attenuated. For details, refer to Operation Manual.
– Voice guidance of the navigation
– Incoming ring tone and incoming voice of the mobile phone that is connected to this
product via Bluetooth® wireless technology
• The
Bluetooth®
word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks
and trade names are those of their respective owners.