Pioneer AVIC-X940BT, Operation Manual

Page: 89 / 240

1 2 3 4
1
Stores the strongest broadcast frequen-
cies
2
Switches the seek mode
3
Tunes in strong signals
4
Switches the reception mode
=
For details of each function, refer to sec-
tions below with the relative titles.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under the preset tuning keys
“
Preset
1
”
to
“
Preset 6
”
and, once stored there, you
can tune in to these frequencies with the
touch of a key.
1 Touch on the
“
Tuner
”
screen.
2 Touch [BSM].
3 Touch [Start] to begin a search.
“
BSM
”
begins to flash. While
“
BSM
”
is flash-
ing, the six strongest broadcast frequencies
will be stored under the preset tuning keys
“
Preset 1
”
to
“
Preset 6
”
in order of their signal
strength. When this is complete,
“
BSM
”
stops
flashing.
p
To cancel the storage process, touch
[
Stop
].
p
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.
Switching the seek mode
You can select the method of seek tuning.
1 Touch on the
“
Tuner
”
screen.
2 Touch [Seek] to select the desired set-
ting.
!
All :
Seeks stations from both analog and digital
broadcasting.
!
HD
:
Seeks from digital broadcasting only.
p
If you select
“
HD
”
on this setting while
[
Blending
] is set to
“
Analog
”
, the setting
on [ Blending ] turns to
“
D/A Auto
”
automa-
tically.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Touch on the
“
Tuner
”
screen.
2 Touch [Local].
3 Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [ Off ].
4 Touch [
c
Prev] or [Next
d
] to set the sen-
sitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM:
1
—
2
—
3
—
4
AM:
1
—
2
p
The FM
“
4
”
(AM
“
2
”
) setting allows recep-
tion of only the strongest stations, while
lower settings let you receive weaker sta-
tions.
Switching the reception mode
If a digital broadcast reception condition gets
poor, the tuner automatically switches to the
analog broadcast of the same frequency level
by default. If you want to prevent a frequent
automatic switching, switch this setting to
[
Analog ].
1 Touch on the
“
Tuner
”
screen.
En
89
Chapter
16
HD
Radio
™
reception
HD Radio
™
reception