Pioneer AVIC-X1, Installation Manual

Page: 19 / 181

• Install the display unit between the driver’s seat and front passenger seat so
that it will not be hit by the driver or passenger if the vehicle stops quickly.
• Never install the display unit in front of or next to the place in the dash,
door, or pillar from which one of your vehicle’s airbags would deploy. Please
refer to your vehicle’s Owner’s Manual for reference to the deployment area
of the frontal airbags.
• Do not install the display unit and Hide-away unit in a place where it will
impair the performance of any of the vehicle’s operating systems, including
airbags and headrests.
To guard against electromagnetic interference
• In order to prevent interference, set the following items as far as possible from the dis-
play unit and Hide-away unit of this Navigation System, other cables or leads:
- TV aerial and aerial lead
- FM, MW/LW aerial and its lead
- GPS aerial and its lead
In addition you should lay or route each aerial lead as far as possible from other aerial
leads.
Do not bind them together, lay or route them together, or cross them.
Such electromagnetic noise will increase the potential for errors in the location display.
Before installing
• Consult with your nearest dealer if installation requires the drilling of holes or other mod-
ifications of the vehicle.
• Before finally installing the unit, connect the wiring temporarily, making sure it is all
connected up properly, and the unit and the system work properly.
18
ENG/MASTER 96 19
English
Español
Deutsch
Français
Italiano
Nederlands
CRD3836A_inst_001_031_UK 1/31/04 12:29 AM Page 19