Pioneer AVIC-S2 Software Manual Download | Manualshive

Page: 8 / 76

background image

1 Warnings and safety information

The features of this Navigation System are intended solely as an aid to you. It

is not a substitute for your attentiveness, judgement, and care when driving or when
otherwise operating this Navigation System.

Do not operate this Navigation System if doing so in any way will divert your
attention from the safe operation of your vehicle or other mode of transportation.
Only a passenger should program/operate this Navigation System while a vehicle is
moving. A driver should use voice guidance (when available) or glance at the screen
only when it is necessary and safe to do so. If prolonged viewing of the screen or
programming/operation of the unit is required by the driver, do so only when the
vehicle is parked in a safe location. Always observe safe driving/operating rules and
follow all existing traffic regulations.

This Navigation System may in certain circumstances display inaccurate or
incomplete information regarding your position, the distance of the objects shown on
the screen, and compass directions. In addition, the system has certain limitations,
including the inability to identify certain one-way streets, temporary traffic restrictions,
road and weather conditions, traffic flow, and potentially unsafe driving areas.
Recent changes to streets/highways also may not be reflected in this database.
Please exercise your own careful judgement in the light of actual conditions and
traffic laws/regulations.

Before using your navigation system, be sure to read and fully understand the
information provided in the "Important Information for the User" document. Read the
entire User Manual before operating this navigation system.

8

«
...
6
7
8
9
10
...
»

Summary of Contents for AVIC-S2













































































Reviews:

No comments

Related manuals for AVIC-S2

Brand: Medion Pages: 96

Brand: Audiovox Pages: 16

Brand: Vitek Pages: 28

Brand: Honda Pages: 253

Brand: Motorola Pages: 46

Brand: Motorola Pages: 52

Brand: Motorola Pages: 109

T815 - MOTONAV - Bluetooth

Brand: Motorola Pages: 63

AVIC-Z1000D33-CHU

Brand: Pioneer Pages: 7

Brand: Pioneer Pages: 3

Brand: Pioneer Pages: 64

Brand: Pioneer Pages: 47

Brand: Pioneer Pages: 69

Brand: Pioneer Pages: 72

Brand: Pioneer Pages: 92

AVIC N4 - Navigation System With DVD player

Brand: Pioneer Pages: 63

Brand: Pioneer Pages: 52

Brand: Pioneer Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands