Pioneer AVIC-S2 Software Manual Download | Manualshive

Page: 56 / 76

background image

Note: Via points are handled as stopovers with regards to u-turns. It means disabling
u-turns on this page will avoid u-turns during the entire route if possible, but when
reaching a via point, the following part of the route may be planned starting in the
opposite direction.

5.4.3.5 Permit needed

To use some roads or enter some areas you may need special permit or permission
from the owners. These roads are excluded from your routes by default. Use this
switch if your vehicle is authorized to enter.

5.4.3.6 Toll Roads

Toll roads are included in your routes by default. If you wish to travel more to avoid
paying a toll, disabling them will make AVIC-S2 plan the best toll-free route for you.

5.4.4 Cross-border planning

By default AVIC-S2 plans routes using the border crossing points. However, if you
live near the border, you can disable border crossing with this switch to remain within
one country.

5.4.4.1 Carpool lanes (for the USA map only)

You can instruct AVIC-S2 to use carpool lanes when planning routes. These lanes
are currently available in the USA only.

This control only appears on the screen when the USA map is available in the
product.

5.5 Language

Here you can set the languages used by AVIC-S2.

5.5.1 Program language

This button displays the current written language of the program. By tapping the
button you can select from a list of available languages. AVIC-S2 will have to be

56

«
...
54
55
56
57
58
...
»

Summary of Contents for AVIC-S2













































































Reviews:

No comments

Related manuals for AVIC-S2

Brand: Alpine Pages: 16

Brand: Clifford Pages: 65

Brand: Tyco Fire Product Pages: 8

DigiWalker C320

Brand: Mio Pages: 93

Brand: Jensen Pages: 15

Brand: Navibox Pages: 42

Brand: Aceinna Pages: 42

Brand: Sune Technology Pages: 16

Brand: Philips Pages: 32

Brand: Sony Pages: 103

Brand: GW Sprinkler Pages: 4

Brand: Graco Pages: 4

Brand: Clarion Pages: 77

Brand: Premier Pages: 25

Brand: Ituran Pages: 51

Brand: Pyle Pages: 48

Brand: Dual Pages: 72

Brand: Renegade Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands